Case 34 — Crystal types: sapphire, mineral and acrylic trade-offs for daily wear
Summary. Pick sapphire for scratch resistance in low-impact use, acrylic for impact tolerance and easy polishing, and mineral as a low-cost middle option. Prefer inner-surface AR if you're worried about wear. Look at crystal profile when comparing thickness. Choose by how you'll use the watch, not by the material label.
Case 33 — Date window centring: compare the same date at the same angle
Use the same numeral, camera axis and approximate image scale. Keep the uncropped originals alongside the detail crops and distinguish optical balance from physical window alignment.
Case 6 — QC checklist: prioritise observable faults over pixel hunting
Correction note for “QC checklist: prioritise observable faults over pixel hunting”: retain the wording beginning “Start with function, legibility, assembly and…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Clarifying question first: do you have a baseline? If you've never recorded the watch's rate or power reserve, 'drifting' is hard to judge. Start a simple log now with daily offset against a reference time for a week, and the hours it runs from full wind. Once you have that, later changes mean something.
Case 37 — Lug-to-lug and end-link overhang in wrist photographs · source wording exercise
Method note for “Lug-to-lug and end-link overhang in wrist photographs”: use “Use a similar camera distance and neutral wrist position; photographs support…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Retain the source wording beside any paraphrase.
Case 44 — Lume questions: why does my lume fade so quickly, and how should I compare it? · source wording exercise
Correction note for “Lume questions: why does my lume fade so quickly, and how should I compare it?”: retain the wording beginning “Afterglow fades fastest in the first minutes and then settles to…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Retain the source wording beside any paraphrase.
Case 28 — Lug-to-lug and end-link overhang in wrist photographs
Record lug-to-lug and the effective span including rigid end links. Use a similar camera distance and neutral wrist position; photographs support fit discussion but do not replace measurements.
Can the same settings and winding state be used for several positions? Record each position separately rather than combining measurements taken under different conditions.
Reader check for “Service enquiry: information a watchmaker can use”: distinguish the discussion point “Be honest about the watch and request an assessment…” from its proposed application. The thread offers a way to reason about the question, without adding a personal experience or a newly observed outcome. Review focus: scope. Keep the stated question separate from any broader claim.
Photograph the item and protective packing separately from the label. Remove names, addresses, barcodes and tracking tokens from public images while keeping originals privately.
Clarification for “QC checklist: prioritise observable faults over pixel hunting”: the point beginning “Start with function, legibility, assembly and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Reader check for “Forum comparison archive: link the evidence and the correction”: distinguish the discussion point “Preserve the reasoning trail instead of silently replacing an…” from its proposed application. The thread offers a way to reason about the question, without adding a personal experience or a newly observed outcome. Review focus: scope. Keep the stated question separate from any broader claim.
Record lug-to-lug and the effective span including rigid end links. Use a similar camera distance and neutral wrist position; photographs support fit discussion but do not replace measurements.
Case 36 — Accuracy expectations: is -8 s/d acceptable on an entry-level automatic?
A correction to a common belief: an automatic doesn't need to match a quartz watch to be healthy. Consistency matters more than the absolute figure. A watch that's reliably -8 every day is easy to live with, since you correct it once a week. One that swings from +10 to -15 is the real concern.
Ask for a straight-on dial photo with diffuse light and no flash, the full dial in frame, and the hands placed away from the indices (10:10 isn't ideal, because it covers the upper markers). Flash flattens printing and hides lume condition. Diffuse light shows print edges, alignment and any spotting.