Case 27 — Magnetism and rate: record evidence before naming a cause
Record the change and the circumstances without treating the suspected cause as established. A competent watchmaker can test and diagnose it; random adjustment is not a substitute for assessment.
Summary draft for “Model comparison: dive bezel action and alignment, how to compare fairly”: the answer addresses “Separate three properties: click count (60 or 120 positions), feel (how…”; the related point is “Crisp vs mushy is mostly about…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Case 2 — Bracelet fit: half-links, micro-adjust holes and the 'between sizes' problem
Wrist size changes during the day and with temperature, sometimes by several millimetres. A fit that feels tight in the afternoon may be right in the morning. Before buying parts, check the fit at different times. You may find the 'too tight' setting is only a problem a few hours a day.
Case 46 — Service enquiry: information a watchmaker can use · source wording exercise
Correction note for “Service enquiry: information a watchmaker can use”: retain the wording beginning “Be honest about the watch and request an assessment…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Retain the source wording beside any paraphrase.
Clarification for “Shipping timeline: separate dispatch, handover and scan events”: the point beginning “Distinguish label creation from physical acceptance and retain dated…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: source wording. Retain the source wording beside any paraphrase.
A bright initial glow followed by a steep drop is normal for photoluminescent pigments. Afterglow fades fastest in the first minutes and then settles to a dim, long-lasting level that dark-adapted eyes can still read. The real question is whether it's readable after an hour in darkness, not how it looks right after charging.
Clarification for “Model comparison: dive bezel action and alignment, how to compare fairly”: the point beginning “Crisp vs mushy is mostly about…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Proposed reusable request list. 1) Straight dial, diffuse light, hands clear of markers. 2) Both case profiles. 3) Lug tops at an angle. 4) Caseback and engravings. 5) Clasp and bracelet end links. 6) Dated note in frame. Optional: timegrapher reading or movement photos. Add or change items with a reason, and I'll keep the list current.
Summary draft for “Lug-to-lug and end-link overhang in wrist photographs”: the answer addresses “Use a similar camera distance and neutral wrist position; photographs support…”; the related point is “Record lug-to-lug and the effective span…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Case 44 — Lume comparison: keep exposure and charging conditions consistent · source wording exercise
Two glowing dials are shown with different camera exposure and unknown charging time. What can the images establish?
Review focus: source wording. Retain the source wording beside any paraphrase. Use the original answer fragment “Repeat with equal light source, charging duration, elapsed time and camera…” as the discussion anchor; no new event or result is supplied.
Exercise RWF-16431/44: address this question within its stated limits.
Case 26 — Clasp photographs: what to request before judging alignment
Request open and closed views from both sides, with the watch supported safely. Separate cosmetic alignment from whether the clasp engages reliably; functional concerns need hands-on inspection.
Case 36 — Bracelet fit: half-links, micro-adjust holes and the 'between sizes' problem
My bracelet is either slightly too tight or slightly loose with any link combination. The clasp has three micro-adjust holes, and there are no half-links. What are the options before I give up and go to a strap?
Exercise RWF-14227/36: address this question within its stated limits.
Add a dated correction near the original conclusion and link the new evidence. Preserve the reasoning trail instead of silently replacing an uncertain claim with a confident one.
Case 36 — Case finishing: distinguish a reflection from a surface mark
Clarification for “Case finishing: distinguish a reflection from a surface mark”: the point beginning “Ask for photographs with the light moved and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Method note for “Seller review template: facts, dates and unresolved questions”: use “Use fields for order date, promised terms, dated…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.