Case 23 — Case finishing: distinguish a reflection from a surface mark
Summary draft for “Case finishing: distinguish a reflection from a surface mark”: the answer addresses “Ask for photographs with the light moved and…”; the related point is “A mark should be assessed across multiple views; aggressive polishing…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Amplitude depends on the movement and measurement setup. Compare it with appropriate specifications and a qualified watchmaker’s assessment; a universal pass/fail threshold would be misleading.
Add lug-to-lug, thickness and lug width as separate rows. Diameter alone tells you little about wearability. Two cases 2mm apart in diameter can be within 1mm of each other lug to lug, and that number decides whether the watch overhangs a small wrist. Also give the source for each figure: manufacturer sheet, caliper measurement, or catalogue listing.
Case 42 — Bracelet fit: measuring the usable clasp adjustment · source wording exercise
Summary draft for “Bracelet fit: measuring the usable clasp adjustment”: the answer addresses “Request the closed bracelet circumference rather than inferring…”; the related point is “Record wrist circumference, removable links and the clasp…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: source wording. Retain the source wording beside any paraphrase.
Summary draft for “Service enquiry: information a watchmaker can use”: the answer addresses “Document when it stops, winding behaviour, recent impacts and…”; the related point is “Be honest about the watch and request an assessment…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Before the table goes live, a question: are you comparing current production only, or older references too? Dial printing, lume colour and crown signing often changed between batches. If older pieces are in scope, add a production-period column, or every disagreement will look like an error when it's really a running change.
Correction note for “Maintenance question: how do I tell if an automatic actually needs service?”: retain the wording beginning “The calendar interval is a conservative…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Clarification for “A maintenance log that remains useful after a sale”: the point beginning “Keep the date, work performed, provider invoice reference…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
On anti-reflective coatings: inner-surface AR cuts glare without wear concerns. Outer-surface AR improves legibility further but can scuff over time, and the scuffs show up as hazy patches in certain light. When comparing two watches, check which surfaces are coated. Spec sheets often just say 'AR coated' without saying where.
Clarification for “Service enquiry: information a watchmaker can use”: the point beginning “Document when it stops, winding behaviour, recent impacts and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 40 — Movement identification: the limits of a rotor photograph · source wording exercise
Clarification for “Movement identification: the limits of a rotor photograph”: the point beginning “Ask a qualified watchmaker to inspect it if identification matters for…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: source wording. Retain the source wording beside any paraphrase.
Case 22 — Crown operation: when a forum cannot diagnose the resistance
Clarification for “Crown operation: when a forum cannot diagnose the resistance”: the point beginning “Describe whether resistance occurs during winding or setting and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 32 — Beginner glossary Q&A: complication, caliber, jewel count, power reserve
Caliber is the movement's model designation, like a part number. Two watches from different brands can share the same caliber family with different finishing or regulation. On a spec sheet it tells you what's inside and roughly what service parts are available. It doesn't tell you how well that particular example was adjusted.
Method note for “Comparing versions without mixing case sizes”: use “Match reference, dimensions and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 32 — Shipping timeline: separate dispatch, handover and scan events
Method note for “Shipping timeline: separate dispatch, handover and scan events”: use “Distinguish label creation from physical acceptance and retain dated…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.