Case 12 — Date window centring: compare the same date at the same angle
Method note for “Date window centring: compare the same date at the same angle”: use “Use the same numeral, camera axis…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Ask a qualified watchmaker about a suitable test for that individual case and record the test date and method. A photograph or a caseback engraving is not proof of water resistance.
Case 30 — Timegrapher reading context: what do rate, amplitude and beat error actually tell me?
Amplitude depends on the movement and measurement setup. Compare it with appropriate specifications and a qualified watchmaker’s assessment; a universal pass/fail threshold would be misleading.
Back-play is the most objective feel measurement. Set the bezel on a click and gently push it the other way without forcing it. Noticeable wobble before it engages means play. A little is common and within normal production, but if one model has visible movement and the other doesn't, that's a real difference you can describe.
Limit of the answer in “Model comparison: dive bezel action and alignment, how to compare fairly”: “Crisp vs mushy is mostly about…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Case 27 — Seller review template: facts, dates and unresolved questions
Clarification for “Seller review template: facts, dates and unresolved questions”: the point beginning “Use fields for order date, promised terms, dated…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 46 — Service enquiry: information a watchmaker can use · source wording exercise
Correction note for “Service enquiry: information a watchmaker can use”: retain the wording beginning “Be honest about the watch and request an assessment…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Retain the source wording beside any paraphrase.
Case 27 — Maintenance question: how do I tell if an automatic actually needs service?
Keep a baseline log, describe changes in rate or running time and stop forcing rough winding. Follow the manufacturer’s guidance and arrange professional assessment when operation changes. A forum cannot prescribe a universal service interval.
Case 10 — Reading a timegrapher recording without losing the context
The supplied screen shows a rate but does not identify the lift angle, position or winding state. Which observations should accompany the recording?
Exercise RWF-15341/10: address this question within its stated limits.
Case 19 — Comparing dial colour under different lighting
Summary draft for “Comparing dial colour under different lighting”: the answer addresses “State the lighting and…”; the related point is “Compare controlled images where available and avoid calling a…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Case 29 — Bracelet fit: measuring the usable clasp adjustment
Record wrist circumference, removable links and the clasp adjustment range in millimetres. Request the closed bracelet circumference rather than inferring it from marketing dimensions.
Case 20 — Accuracy expectations: is -8 s/d acceptable on an entry-level automatic?
Start with how you measured it. Comparing against a phone clock once a day for a week, at the same time, and noting the offset is reliable enough. One 24-hour reading isn't, because rate depends on wrist time, position overnight and state of wind. Average across several days before deciding anything.
Method note for “First QC request: the minimum useful information”: use “Include complete instrument settings where relevant and say…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 14 — Lume questions: why does my lume fade so quickly, and how should I compare it?
A practical test without a camera: charge both watches the same way, sit in a dark room, and check readability at 5 minutes, 30 minutes and 2 hours. Write down which you can still read the time on. It's subjective but repeatable, and more useful than a single photo.
Case 35 — Packing photographs: document condition without exposing an address
Correction note for “Packing photographs: document condition without exposing an address”: retain the wording beginning “Photograph the item and protective packing…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.