Case 31 — Beginner glossary Q&A: complication, caliber, jewel count, power reserve
New here and reading spec sheets for the first time. Four terms keep tripping me up: complication, caliber, jewel count and power reserve. Short definitions would help, and so would a note on which ones actually matter when comparing two everyday watches.
Exercise RWF-30032/31: address this question within its stated limits.
Describe whether resistance occurs during winding or setting and whether the crown engages consistently. Stop forcing it and arrange inspection rather than trying an unverified repair from a thread.
Case 3 — Strap dimensions: lug width, taper, thickness and spring bar diameter explained
Lug width is the essential one: the inside distance between the lugs where the strap fits. Measure with a ruler marked in millimetres, ideally reading it under magnification. Most watches use even numbers (18, 20, 22mm), but odd widths exist. If you measure 19 or 21, measure again and check the manufacturer spec before ordering.
Reader check for “Packing photographs: document condition without exposing an address”: distinguish the discussion point “Photograph the item and protective packing…” from its proposed application. The thread offers a way to reason about the question, without adding a personal experience or a newly observed outcome. Review focus: scope. Keep the stated question separate from any broader claim.
Clarification for “QC checklist: prioritise observable faults over pixel hunting”: the point beginning “Start with function, legibility, assembly and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 19 — Comparing versions without mixing case sizes
Method note for “Comparing versions without mixing case sizes”: use “Match reference, dimensions and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Method note for “Magnetism and rate: record evidence before naming a cause”: use “Record the change and the circumstances without treating…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Clarification for “Crystal reflections: why a dark patch is not a coating test”: the point beginning “No single lighting setup settles…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Method note for “Magnetism and rate: record evidence before naming a cause”: use “Record the change and the circumstances without treating…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 41 — Disputed observation: is this dial colour shift real or just lighting? · source wording exercise
Correction note for “Disputed observation: is this dial colour shift real or just lighting?”: retain the wording beginning “Two photos of the same dial under different light can…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Retain the source wording beside any paraphrase.
Case 16 — QC photographs: perspective or a genuinely tilted index?
Clarification for “QC photographs: perspective or a genuinely tilted index?”: the point beginning “Request a level straight-on image with the hands…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 35 — Disputed observation: is this dial colour shift real or just lighting?
Suggested protocol. 1) Both dials in one frame. 2) Diffuse daylight, no direct sun, plus a second shot under neutral indoor light. 3) Grey card visible. 4) No filters, no editing. 5) State camera settings if known. If both shots show the same direction of difference, the claim is supported. If the difference flips between lighting conditions, it's most likely lighting.
Case 16 — Clasp photographs: what to request before judging alignment
Summary draft for “Clasp photographs: what to request before judging alignment”: the answer addresses “Request open and closed views from both sides,…”; the related point is “Separate cosmetic alignment from whether the clasp engages reliably;…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Amplitude depends on the movement and measurement setup. Compare it with appropriate specifications and a qualified watchmaker’s assessment; a universal pass/fail threshold would be misleading.
Case 8 — Reading a timegrapher recording without losing the context
Summary draft for “Reading a timegrapher recording without losing the context”: the answer addresses “Keep the complete recording and ask for the…”; the related point is “A single number cannot establish service condition, movement identity…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.