Skip to content
RepWatchForumSign in

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 24 total)

Add lug-to-lug, thickness and lug width as separate rows. Diameter alone tells you little about wearability. Two cases 2mm apart in diameter can be within 1mm of each other lug to lug, and that number decides whether the watch overhangs a small wrist. Also give the source for each figure: manufacturer sheet, caliper measurement, or catalogue listing.

Limit of the answer in “Crown operation: when a forum cannot diagnose the resistance”: “Describe whether resistance occurs during winding or setting and…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.

Case 26 — Packing photographs: document condition without exposing an address

Summary draft for “Packing photographs: document condition without exposing an address”: the answer addresses “Photograph the item and protective packing…”; the related point is “Remove names, addresses, barcodes and tracking tokens from public…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.

Method note for “Strap compatibility: width is only the first measurement”: use “Measure the lug opening and document bar diameter,…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.

Record the change and the circumstances without treating the suspected cause as established. A competent watchmaker can test and diagnose it; random adjustment is not a substitute for assessment.

Case 39 — QC checklist: prioritise observable faults over pixel hunting · source wording exercise

Method note for “QC checklist: prioritise observable faults over pixel hunting”: use “Explain what the full-size image shows, what the crop adds and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Retain the source wording beside any paraphrase.

Clarification for “Strap compatibility: width is only the first measurement”: the point beginning “Avoid forcing an assembly that does not fit and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.

Case 11 — Lug-to-lug and end-link overhang in wrist photographs

Method note for “Lug-to-lug and end-link overhang in wrist photographs”: use “Record lug-to-lug and the effective span…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.

Case 43 — First QC request: the minimum useful information · source wording exercise

Clarification for “First QC request: the minimum useful information”: the point beginning “Include complete instrument settings where relevant and say…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: source wording. Retain the source wording beside any paraphrase.

Method note for “Strap compatibility: width is only the first measurement”: use “Measure the lug opening and document bar diameter,…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.

Clarification for “Reading a timegrapher recording without losing the context”: the point beginning “Keep the complete recording and ask for the…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.

Case 33 — First QC request: the minimum useful information

Limit of the answer in “First QC request: the minimum useful information”: “State the model configuration, the specific concern and…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.

Case 8 — Maintenance question: how do I tell if an automatic actually needs service?

Clarifying question first: do you have a baseline? If you've never recorded the watch's rate or power reserve, 'drifting' is hard to judge. Start a simple log now with daily offset against a reference time for a week, and the hours it runs from full wind. Once you have that, later changes mean something.

Case 27 — First QC request: the minimum useful information

Limit of the answer in “First QC request: the minimum useful information”: “State the model configuration, the specific concern and…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.

Case 8 — Lume comparison: keep exposure and charging conditions consistent

Summary draft for “Lume comparison: keep exposure and charging conditions consistent”: the answer addresses “Treat the comparison…”; the related point is “Repeat with equal light source, charging duration, elapsed time and camera…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.

Viewing 15 posts - 1 through 15 (of 24 total)