Summary draft for “Strap compatibility: width is only the first measurement”: the answer addresses “Measure the lug opening and document bar diameter,…”; the related point is “Avoid forcing an assembly that does not fit and…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Forum Replies Created
Case 21 — Comparing versions without mixing case sizes
Correction note for “Comparing versions without mixing case sizes”: retain the wording beginning “Match reference, dimensions and…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Start with how you measured it. Comparing against a phone clock once a day for a week, at the same time, and noting the offset is reliable enough. One 24-hour reading isn't, because rate depends on wrist time, position overnight and state of wind. Average across several days before deciding anything.
Clarification for “Date window centring: compare the same date at the same angle”: the point beginning “Keep the uncropped originals alongside the detail crops and distinguish…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 30 — Lug-to-lug and end-link overhang in wrist photographs
Method note for “Lug-to-lug and end-link overhang in wrist photographs”: use “Record lug-to-lug and the effective span…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 2 — Accuracy expectations: is -8 s/d acceptable on an entry-level automatic?
Compare the observed rate with the exact caliber and cased-watch specification, if available. An example such as -8 seconds per day cannot be declared acceptable solely from its price category.
Case 34 — Case finishing: distinguish a reflection from a surface mark
A bright line appears in one polished-case image. What additional evidence would distinguish a mark from reflected light?
Exercise RWF-23898/34: address this question within its stated limits.
Case 24 — Case finishing: distinguish a reflection from a surface mark
Method note for “Case finishing: distinguish a reflection from a surface mark”: use “Ask for photographs with the light moved and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 18 — Case finishing: distinguish a reflection from a surface mark
Method note for “Case finishing: distinguish a reflection from a surface mark”: use “Ask for photographs with the light moved and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Clarification for “QC photographs: perspective or a genuinely tilted index?”: the point beginning “Request a level straight-on image with the hands…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Lug width is the essential one: the inside distance between the lugs where the strap fits. Measure with a ruler marked in millimetres, ideally reading it under magnification. Most watches use even numbers (18, 20, 22mm), but odd widths exist. If you measure 19 or 21, measure again and check the manufacturer spec before ordering.
Describe whether resistance occurs during winding or setting and whether the crown engages consistently. Stop forcing it and arrange inspection rather than trying an unverified repair from a thread.
Case 1 — Shipping timeline: separate dispatch, handover and scan events
A tracking page has no new event after a label was created. How can the timeline be discussed without inventing a carrier explanation?
Exercise RWF-12911/1: address this question within its stated limits.
Clarification for “QC checklist: prioritise observable faults over pixel hunting”: the point beginning “Start with function, legibility, assembly and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 27 — Timegrapher reading context: what do rate, amplitude and beat error actually tell me?
The reported numbers alone do not establish damage or the need for service. Confirm the setup, collect comparable readings and ask a watchmaker to assess a concerning or changing pattern.