Skip to content
RepWatchForumSign in

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 18 total)
TimeLog 08889Participant

Case 12 — Beginner glossary Q&A: complication, caliber, jewel count, power reserve

Jewel count describes bearings used in a movement design; it is not a quality ranking. Compare the documented movement architecture and service support rather than assuming a higher count makes one watch better.

TimeLog 08889Participant

Case 14 — Strap dimensions: lug width, taper, thickness and spring bar diameter explained

Summary order of importance. 1) Lug width, measured between the lugs. 2) Lug-end thickness against clearance. 3) Spring bar diameter. 4) Taper and buckle width. 5) Length, which is usually given as long side / short side in mm and should be compared with a strap that already fits you.

TimeLog 08889Participant

Wrist size changes during the day and with temperature, sometimes by several millimetres. A fit that feels tight in the afternoon may be right in the morning. Before buying parts, check the fit at different times. You may find the 'too tight' setting is only a problem a few hours a day.

TimeLog 08889Participant

Case 5 — Disputed observation: is this dial colour shift real or just lighting?

Clarifying question: does anyone in the thread have access to both versions at once? Without simultaneous comparison, every claim either way is weak evidence. If not, the next best option is photos with a grey card in frame and white balance locked or set manually, which at least makes separate photos roughly comparable.

TimeLog 08889Participant

Case 34 — Lug-to-lug and end-link overhang in wrist photographs

A wide-angle wrist photo exaggerates the nearest edge of the case. How can two watches be compared fairly?

Exercise RWF-19067/34: address this question within its stated limits.

TimeLog 08889Participant

Method note for “Lume questions: why does my lume fade so quickly, and how should I compare it?”: use “A bright initial glow followed by a steep drop…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.

TimeLog 08889Participant

If the manufacturer provides a suitable procedure, a running-time log can support a service enquiry. State the winding method and stop time. A shortened run does not identify the cause by itself.

TimeLog 08889Participant

Summary draft for “QC checklist: prioritise observable faults over pixel hunting”: the answer addresses “Explain what the full-size image shows, what the crop adds and…”; the related point is “Start with function, legibility, assembly and…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.

TimeLog 08889Participant

Record the change and the circumstances without treating the suspected cause as established. A competent watchmaker can test and diagnose it; random adjustment is not a substitute for assessment.

TimeLog 08889Participant

A bright initial glow followed by a steep drop is normal for photoluminescent pigments. Afterglow fades fastest in the first minutes and then settles to a dim, long-lasting level that dark-adapted eyes can still read. The real question is whether it's readable after an hour in darkness, not how it looks right after charging.

TimeLog 08889Participant

Case 47 — Model comparison: dive bezel action and alignment, how to compare fairly · source wording exercise

Limit of the answer in “Model comparison: dive bezel action and alignment, how to compare fairly”: “Crisp vs mushy is mostly about…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: source wording. Retain the source wording beside any paraphrase.

TimeLog 08889Participant

Case 8 — Lug-to-lug and end-link overhang in wrist photographs

Correction note for “Lug-to-lug and end-link overhang in wrist photographs”: retain the wording beginning “Record lug-to-lug and the effective span…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.

TimeLog 08889Participant

Case 6 — Service enquiry: information a watchmaker can use

Document when it stops, winding behaviour, recent impacts and the positions in which it happens. Be honest about the watch and request an assessment before approving work or ordering parts.

TimeLog 08889Participant

Correction note for “Lume questions: why does my lume fade so quickly, and how should I compare it?”: retain the wording beginning “A bright initial glow followed by a steep drop…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.

TimeLog 08889Participant

Clarification for “Reading a timegrapher recording without losing the context”: the point beginning “A single number cannot establish service condition, movement identity…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.

Viewing 15 posts - 1 through 15 (of 18 total)