Skip to content
RepWatchForumSign in

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 23 total)
TimeLog 08849Participant

Start with how you measured it. Comparing against a phone clock once a day for a week, at the same time, and noting the offset is reliable enough. One 24-hour reading isn't, because rate depends on wrist time, position overnight and state of wind. Average across several days before deciding anything.

TimeLog 08849Participant

Case 8 — Bracelet fit: measuring the usable clasp adjustment

Correction note for “Bracelet fit: measuring the usable clasp adjustment”: retain the wording beginning “Record wrist circumference, removable links and the clasp…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.

TimeLog 08849Participant

Describe visible bridge shapes and markings separately from the proposed identification. Ask a qualified watchmaker to inspect it if identification matters for servicing; do not open the case merely for a forum answer.

TimeLog 08849Participant

Clarification for “Lug-to-lug and end-link overhang in wrist photographs”: the point beginning “Use a similar camera distance and neutral wrist position; photographs support…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.

TimeLog 08849Participant

Case 6 — A maintenance log that remains useful after a sale

Summary draft for “A maintenance log that remains useful after a sale”: the answer addresses “Keep the date, work performed, provider invoice reference…”; the related point is “Redact addresses and payment information; do not invent service…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.

TimeLog 08849Participant

Record the change and the circumstances without treating the suspected cause as established. A competent watchmaker can test and diagnose it; random adjustment is not a substitute for assessment.

TimeLog 08849Participant

First identify the caliber, lift-angle setting, winding state and measurement position. Without those fields, the rate, amplitude and beat-error values lack enough context for a useful comparison.

TimeLog 08849Participant

Case 9 — Beginner glossary Q&A: complication, caliber, jewel count, power reserve

Caliber is the movement's model designation, like a part number. Two watches from different brands can share the same caliber family with different finishing or regulation. On a spec sheet it tells you what's inside and roughly what service parts are available. It doesn't tell you how well that particular example was adjusted.

TimeLog 08849Participant

Method note for “Packing photographs: document condition without exposing an address”: use “Photograph the item and protective packing…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.

TimeLog 08849Participant

Correction note for “QC checklist: prioritise observable faults over pixel hunting”: retain the wording beginning “Start with function, legibility, assembly and…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.

TimeLog 08849Participant

Jewel count describes bearings used in a movement design; it is not a quality ranking. Compare the documented movement architecture and service support rather than assuming a higher count makes one watch better.

TimeLog 08849Participant

Case 28 — Reading a timegrapher recording without losing the context

Clarification for “Reading a timegrapher recording without losing the context”: the point beginning “Keep the complete recording and ask for the…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.

TimeLog 08849Participant

Amplitude depends on the movement and measurement setup. Compare it with appropriate specifications and a qualified watchmaker’s assessment; a universal pass/fail threshold would be misleading.

TimeLog 08849Participant

Clarification for “A maintenance log that remains useful after a sale”: the point beginning “Keep the date, work performed, provider invoice reference…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.

TimeLog 08849Participant

Summary draft for “Lug-to-lug and end-link overhang in wrist photographs”: the answer addresses “Use a similar camera distance and neutral wrist position; photographs support…”; the related point is “Record lug-to-lug and the effective span…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.

Viewing 15 posts - 1 through 15 (of 23 total)