Case 5 — Crystal types: sapphire, mineral and acrylic trade-offs for daily wear
Domed crystals of any material add distortion at the edges, which some people like and others find hard to read at angles. Box-shaped or high-domed crystals also add thickness. If you're comparing two otherwise similar watches, check total thickness against crystal profile before assuming the case itself is thicker.
One method that often helps without any service is using overnight resting position to cancel daily drift. Many watches gain in some positions and lose in others. If yours loses on the wrist, try leaving it crown up or dial up overnight and log the result for a few nights. Some people get close to zero this way.
Request a level straight-on image with the hands clear of the marker. Compare two independently aligned images before drawing a conclusion; an overlay cannot correct an oblique camera angle.
Case 1 — Case finishing: distinguish a reflection from a surface mark
Clarification for “Case finishing: distinguish a reflection from a surface mark”: the point beginning “Ask for photographs with the light moved and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Summary draft for “Lume comparison: keep exposure and charging conditions consistent”: the answer addresses “Repeat with equal light source, charging duration, elapsed time and camera…”; the related point is “Treat the comparison…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Case 26 — Case finishing: distinguish a reflection from a surface mark
Method note for “Case finishing: distinguish a reflection from a surface mark”: use “Ask for photographs with the light moved and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 3 — A maintenance log that remains useful after a sale
Method note for “A maintenance log that remains useful after a sale”: use “Keep the date, work performed, provider invoice reference…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Clarification for “Comparing dial colour under different lighting”: the point beginning “State the lighting and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Summary draft for “Service enquiry: information a watchmaker can use”: the answer addresses “Be honest about the watch and request an assessment…”; the related point is “Document when it stops, winding behaviour, recent impacts and…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Clarification for “Comparing versions without mixing case sizes”: the point beginning “Match reference, dimensions and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: source wording. Retain the source wording beside any paraphrase.
Case 22 — Disputed observation: is this dial colour shift real or just lighting?
Suggested protocol. 1) Both dials in one frame. 2) Diffuse daylight, no direct sun, plus a second shot under neutral indoor light. 3) Grey card visible. 4) No filters, no editing. 5) State camera settings if known. If both shots show the same direction of difference, the claim is supported. If the difference flips between lighting conditions, it's most likely lighting.
Clarification for “Comparing dial colour under different lighting”: the point beginning “State the lighting and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Limit of the answer in “Lug-to-lug and end-link overhang in wrist photographs”: “Use a similar camera distance and neutral wrist position; photographs support…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Domed crystals of any material add distortion at the edges, which some people like and others find hard to read at angles. Box-shaped or high-domed crystals also add thickness. If you're comparing two otherwise similar watches, check total thickness against crystal profile before assuming the case itself is thicker.
Method note for “QC photographs: perspective or a genuinely tilted index?”: use “Request a level straight-on image with the hands…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.