Log the rate over several comparable days, identify the correct specification and state the conditions. Stable and changing patterns raise different questions; a watchmaker can assess whether regulation, inspection or no action is appropriate.
Forum Replies Created
Case 34 — Disputed observation: is this dial colour shift real or just lighting?
Suggested protocol. 1) Both dials in one frame. 2) Diffuse daylight, no direct sun, plus a second shot under neutral indoor light. 3) Grey card visible. 4) No filters, no editing. 5) State camera settings if known. If both shots show the same direction of difference, the claim is supported. If the difference flips between lighting conditions, it's most likely lighting.
Case 34 — Accuracy expectations: is -8 s/d acceptable on an entry-level automatic?
Regulation is possible if you want it closer. On many movements it's a quick adjustment by a watchmaker. Can you check whether the losing rate is consistent or getting worse? A stable -8 is a good candidate for simple regulation. A growing loss points to something else, such as falling amplitude, and regulation alone won't fix that.
Summary draft for “QC checklist: prioritise observable faults over pixel hunting”: the answer addresses “Explain what the full-size image shows, what the crop adds and…”; the related point is “Start with function, legibility, assembly and…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Method note for “Service enquiry: information a watchmaker can use”: use “Document when it stops, winding behaviour, recent impacts and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 16 — Magnetism and rate: record evidence before naming a cause
Clarification for “Magnetism and rate: record evidence before naming a cause”: the point beginning “Record the change and the circumstances without treating…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 13 — Lug-to-lug and end-link overhang in wrist photographs
A wide-angle wrist photo exaggerates the nearest edge of the case. How can two watches be compared fairly?
Exercise RWF-21140/13: address this question within its stated limits.
Distinguish label creation from physical acceptance and retain dated event text with personal details removed. Ask the sender or carrier for clarification; missing scans alone do not establish loss or seizure.
Clarification for “First QC request: the minimum useful information”: the point beginning “State the model configuration, the specific concern and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 36 — Strap dimensions: lug width, taper, thickness and spring bar diameter explained
Correction to a common shortcut: don't measure lug width on an existing strap. Leather and rubber straps compress or swell, and some are made slightly undersized on purpose. Always measure between the lugs themselves, with the strap removed if possible.
Case 24 — Crystal reflections: why a dark patch is not a coating test
Summary draft for “Crystal reflections: why a dark patch is not a coating test”: the answer addresses “No single lighting setup settles…”; the related point is “Compare multiple controlled angles and describe the visible observation without asserting…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Case 44 — Case finishing: distinguish a reflection from a surface mark · source wording exercise
Clarification for “Case finishing: distinguish a reflection from a surface mark”: the point beginning “A mark should be assessed across multiple views; aggressive polishing…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: source wording. Retain the source wording beside any paraphrase.
Case 13 — What a water-resistance claim does and does not establish
Clarification for “What a water-resistance claim does and does not establish”: the point beginning “Ask a qualified watchmaker about a suitable test for that individual…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Limit of the answer in “Seller review template: facts, dates and unresolved questions”: “Use fields for order date, promised terms, dated…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: source wording. Retain the source wording beside any paraphrase.
One more term that will come up is 'hacking', meaning the seconds hand stops when you pull the crown so you can set the time to the second. It's minor, but beginners often assume every automatic has it, and not all do. That rounds out the glossary: caliber means what, complication means extra functions, jewels mean bearings, power reserve means how long it runs, hacking means precise setting.