Skip to content
RepWatchForumSign in

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 27 total)
ClaspCheck 08576Participant

Clarification for “Lug-to-lug and end-link overhang in wrist photographs”: the point beginning “Record lug-to-lug and the effective span…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.

ClaspCheck 08576Participant

A notation like 20/16 means 20mm at the lugs, tapering to 16mm at the buckle. Taper affects look and comfort more than fit. A strong taper suits smaller and dressier cases, a straight strap suits sport watches. Your buckle or clasp also has to match the narrow end, so check that if you want to reuse an existing buckle.

ClaspCheck 08576Participant

Case 44 — QC checklist: prioritise observable faults over pixel hunting · source wording exercise

Limit of the answer in “QC checklist: prioritise observable faults over pixel hunting”: “Explain what the full-size image shows, what the crop adds and…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: source wording. Retain the source wording beside any paraphrase.

ClaspCheck 08576Participant

Method note for “Accuracy expectations: is -8 s/d acceptable on an entry-level automatic?”: use “Start with how you…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.

ClaspCheck 08576Participant

Separate three properties: click count (60 or 120 positions), feel (how firm each click is, and whether there's back-play), and alignment (whether the pip lines up with the 12 o'clock marker at rest). Crisp vs mushy is mostly about feel and back-play. Alignment can be measured, so treat it separately.

ClaspCheck 08576Participant

Clarification for “Clasp photographs: what to request before judging alignment”: the point beginning “Request open and closed views from both sides,…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.

ClaspCheck 08576Participant

Case 32 — Bracelet fit: half-links, micro-adjust holes and the 'between sizes' problem

My bracelet is either slightly too tight or slightly loose with any link combination. The clasp has three micro-adjust holes, and there are no half-links. What are the options before I give up and go to a strap?

Exercise RWF-27479/32: address this question within its stated limits.

ClaspCheck 08576Participant

Case 31 — Disputed observation: is this dial colour shift real or just lighting?

Something to keep apart: sunburst and gradient dials can look like different colours depending on viewing angle, even on the same piece. A shift that appears only at certain angles is a finish effect, not a batch difference. Include a straight-on shot and one tilted shot so readers can tell the two apart.

ClaspCheck 08576Participant

Correction note for “Comparing dial colour under different lighting”: retain the wording beginning “State the lighting and…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Retain the source wording beside any paraphrase.

ClaspCheck 08576Participant

Case 13 — Comparing versions without mixing case sizes

Method note for “Comparing versions without mixing case sizes”: use “Match reference, dimensions and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.

ClaspCheck 08576Participant

Case 10 — What a water-resistance claim does and does not establish

Ask a qualified watchmaker about a suitable test for that individual case and record the test date and method. A photograph or a caseback engraving is not proof of water resistance.

ClaspCheck 08576Participant

Ask a qualified watchmaker about a suitable test for that individual case and record the test date and method. A photograph or a caseback engraving is not proof of water resistance.

ClaspCheck 08576Participant

Method note for “A maintenance log that remains useful after a sale”: use “Keep the date, work performed, provider invoice reference…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.

ClaspCheck 08576Participant

Case 33 — QC photography: what photos actually help verify a pre-owned listing?

Proposed reusable request list. 1) Straight dial, diffuse light, hands clear of markers. 2) Both case profiles. 3) Lug tops at an angle. 4) Caseback and engravings. 5) Clasp and bracelet end links. 6) Dated note in frame. Optional: timegrapher reading or movement photos. Add or change items with a reason, and I'll keep the list current.

ClaspCheck 08576Participant

Case 22 — A maintenance log that remains useful after a sale

Which information should a transferable maintenance log retain while protecting the owner’s identity?

Exercise RWF-16355/22: address this question within its stated limits.

Viewing 15 posts - 1 through 15 (of 27 total)