Case 35 — Lug-to-lug and end-link overhang in wrist photographs
Correction note for “Lug-to-lug and end-link overhang in wrist photographs”: retain the wording beginning “Record lug-to-lug and the effective span…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Method note for “Crown operation: when a forum cannot diagnose the resistance”: use “Stop forcing it and arrange inspection rather than trying…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 49 — Crystal reflections: why a dark patch is not a coating test · source wording exercise
Clarification for “Crystal reflections: why a dark patch is not a coating test”: the point beginning “Compare multiple controlled angles and describe the visible observation without asserting…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: source wording. Retain the source wording beside any paraphrase.
Case 24 — QC photography: what photos actually help verify a pre-owned listing?
When asking a seller for extra photos of a pre-owned watch, what shots are actually useful as evidence? Listings tend to have glossy angled photos that hide more than they show. I'd like a standard request list the forum can reuse.
Exercise RWF-28457/24: address this question within its stated limits.
Case 11 — Strap compatibility: width is only the first measurement
Limit of the answer in “Strap compatibility: width is only the first measurement”: “Measure the lug opening and document bar diameter,…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Case 10 — Shipping timeline: separate dispatch, handover and scan events
Clarification for “Shipping timeline: separate dispatch, handover and scan events”: the point beginning “Distinguish label creation from physical acceptance and retain dated…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
State the lighting and white-balance limitations. Compare controlled images where available and avoid calling a colour defect from differently processed photographs.
Correction note for “Maintenance question: how do I tell if an automatic actually needs service?”: retain the wording beginning “The calendar interval is a conservative…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Add lug-to-lug, thickness and lug width as separate rows. Diameter alone tells you little about wearability. Two cases 2mm apart in diameter can be within 1mm of each other lug to lug, and that number decides whether the watch overhangs a small wrist. Also give the source for each figure: manufacturer sheet, caliper measurement, or catalogue listing.
Case 39 — Disputed observation: is this dial colour shift real or just lighting? · source wording exercise
Correction note for “Disputed observation: is this dial colour shift real or just lighting?”: retain the wording beginning “Two photos of the same dial under different light can…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Retain the source wording beside any paraphrase.
Clarification for “Shipping timeline: separate dispatch, handover and scan events”: the point beginning “Distinguish label creation from physical acceptance and retain dated…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Clarification for “Magnetism and rate: record evidence before naming a cause”: the point beginning “Record the change and the circumstances without treating…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 12 — Service enquiry: information a watchmaker can use
Method note for “Service enquiry: information a watchmaker can use”: use “Document when it stops, winding behaviour, recent impacts and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 19 — Beginner glossary Q&A: complication, caliber, jewel count, power reserve
One more term that will come up is 'hacking', meaning the seconds hand stops when you pull the crown so you can set the time to the second. It's minor, but beginners often assume every automatic has it, and not all do. That rounds out the glossary: caliber means what, complication means extra functions, jewels mean bearings, power reserve means how long it runs, hacking means precise setting.
Reader check for “Shipping timeline: separate dispatch, handover and scan events”: distinguish the discussion point “Distinguish label creation from physical acceptance and retain dated…” from its proposed application. The thread offers a way to reason about the question, without adding a personal experience or a newly observed outcome. Review focus: scope. Keep the stated question separate from any broader claim.