Case 8 — Movement identification: the limits of a rotor photograph
Summary draft for “Movement identification: the limits of a rotor photograph”: the answer addresses “Describe visible bridge shapes and markings separately…”; the related point is “Ask a qualified watchmaker to inspect it if identification matters for…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Case 7 — Lug-to-lug and end-link overhang in wrist photographs
Record lug-to-lug and the effective span including rigid end links. Use a similar camera distance and neutral wrist position; photographs support fit discussion but do not replace measurements.
Limit of the answer in “Strap compatibility: width is only the first measurement”: “Measure the lug opening and document bar diameter,…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Correction note for “Forum comparison archive: link the evidence and the correction”: retain the wording beginning “Add a dated correction near the original conclusion…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Case 36 — Maintenance question: how do I tell if an automatic actually needs service?
If the manufacturer provides a suitable procedure, a running-time log can support a service enquiry. State the winding method and stop time. A shortened run does not identify the cause by itself.
Clarification for “Shipping timeline: separate dispatch, handover and scan events”: the point beginning “Distinguish label creation from physical acceptance and retain dated…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 9 — Date window centring: compare the same date at the same angle
Clarification for “Date window centring: compare the same date at the same angle”: the point beginning “Use the same numeral, camera axis…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Wrist size changes during the day and with temperature, sometimes by several millimetres. A fit that feels tight in the afternoon may be right in the morning. Before buying parts, check the fit at different times. You may find the 'too tight' setting is only a problem a few hours a day.
Case 16 — Forum comparison archive: link the evidence and the correction
Correction note for “Forum comparison archive: link the evidence and the correction”: retain the wording beginning “Add a dated correction near the original conclusion…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Method note for “Date window centring: compare the same date at the same angle”: use “Use the same numeral, camera axis…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 20 — Magnetism and rate: record evidence before naming a cause
Method note for “Magnetism and rate: record evidence before naming a cause”: use “Record the change and the circumstances without treating…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Limit of the answer in “Strap compatibility: width is only the first measurement”: “Measure the lug opening and document bar diameter,…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Case 29 — Strap dimensions: lug width, taper, thickness and spring bar diameter explained
Thickness matters more than people expect. Straps around 4 to 5mm at the lugs can hit the case or stop the strap folding down on watches with short lugs or tight lug-to-case clearance. Do you know whether your watch has drilled lugs or a tight gap between strap and case? That tells you how much thickness is safe.
Case 13 — Magnetism and rate: record evidence before naming a cause
Method note for “Magnetism and rate: record evidence before naming a cause”: use “Record the change and the circumstances without treating…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Request open and closed views from both sides, with the watch supported safely. Separate cosmetic alignment from whether the clasp engages reliably; functional concerns need hands-on inspection.