Case 33 — Movement identification: the limits of a rotor photograph
Describe visible bridge shapes and markings separately from the proposed identification. Ask a qualified watchmaker to inspect it if identification matters for servicing; do not open the case merely for a forum answer.
Case 5 — Strap compatibility: width is only the first measurement
Two straps share the same nominal width but differ in thickness and spring-bar clearance. Which dimensions need checking?
Exercise RWF-28457/5: address this question within its stated limits.
A stated water-resistance rating does not establish the present condition of an individual watch. Separate the manufacturer specification from a dated inspection or test of the particular example.
Limit of the answer in “Comparison thread: 38mm vs 40mm versions of the same field watch, with a dated correction log”: “Add lug-to-lug, thickness and lug width…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Correction note for “Crown operation: when a forum cannot diagnose the resistance”: retain the wording beginning “Describe whether resistance occurs during winding or setting and…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Case 39 — QC photographs: perspective or a genuinely tilted index? · source wording exercise
Correction note for “QC photographs: perspective or a genuinely tilted index?”: retain the wording beginning “Compare two independently aligned images before drawing a conclusion; an overlay…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Retain the source wording beside any paraphrase.
Case 17 — Lume comparison: keep exposure and charging conditions consistent
Correction note for “Lume comparison: keep exposure and charging conditions consistent”: retain the wording beginning “Treat the comparison…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Case 30 — Lume questions: why does my lume fade so quickly, and how should I compare it?
My watch's lume is bright for a few minutes and then barely visible. Is that normal? People post lume shots of different watches, but they all seem to use different charging and exposure, so I can't tell what's actually better.
Exercise RWF-19961/30: address this question within its stated limits.
Clarification for “Crown operation: when a forum cannot diagnose the resistance”: the point beginning “Describe whether resistance occurs during winding or setting and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Limit of the answer in “Lume comparison: keep exposure and charging conditions consistent”: “Treat the comparison…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Method note for “What a water-resistance claim does and does not establish”: use “Ask a qualified watchmaker about a suitable test for that individual…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 28 — QC checklist: prioritise observable faults over pixel hunting
Start with function, legibility, assembly and clear visible damage. Explain what the full-size image shows, what the crop adds and what remains uncertain; do not turn an overlay into an automatic verdict.
Case 1 — Crystal types: sapphire, mineral and acrylic trade-offs for daily wear
A correction worth making: 'sapphire = premium, mineral = cheap' oversimplifies it. A well-fitted mineral crystal on a modest watch can be perfectly suitable, and replacing a cracked sapphire is usually more expensive. Material is one factor among several, alongside fit, gasket quality and coating.
Clarification for “Comparing dial colour under different lighting”: the point beginning “State the lighting and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 10 — Seller review template: facts, dates and unresolved questions
Correction note for “Seller review template: facts, dates and unresolved questions”: retain the wording beginning “Use fields for order date, promised terms, dated…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.