Record lug-to-lug and the effective span including rigid end links. Use a similar camera distance and neutral wrist position; photographs support fit discussion but do not replace measurements.
Forum Replies Created
Case 25 — Lume questions: why does my lume fade so quickly, and how should I compare it?
Clarifying question: how are you charging it? A few seconds under a warm indoor bulb gives a much weaker charge than daylight or a UV source. Many 'weak lume' reports turn out to be undercharging. Try a consistent charge, such as 30 seconds under a phone flashlight at a fixed distance, before judging.
Case 36 — Maintenance question: how do I tell if an automatic actually needs service?
If the manufacturer provides a suitable procedure, a running-time log can support a service enquiry. State the winding method and stop time. A shortened run does not identify the cause by itself.
Case 30 — Bracelet fit: measuring the usable clasp adjustment
Method note for “Bracelet fit: measuring the usable clasp adjustment”: use “Record wrist circumference, removable links and the clasp…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Photograph the item and protective packing separately from the label. Remove names, addresses, barcodes and tracking tokens from public images while keeping originals privately.
Method note for “Movement identification: the limits of a rotor photograph”: use “Describe visible bridge shapes and markings separately…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Clarification for “Lume comparison: keep exposure and charging conditions consistent”: the point beginning “Treat the comparison…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 34 — Disputed observation: is this dial colour shift real or just lighting?
Status for now: unresolved. The claim is plausible, but no controlled comparison has been posted. Until one appears, describe it as 'reported, not verified'. When someone posts a same-frame, grey-card comparison under two lighting conditions, the thread can update the status with a date and a link to that post.
Case 13 — Movement identification: the limits of a rotor photograph
Only part of the movement is visible and the rotor hides several bridges. Which details can be described without claiming certainty?
Exercise RWF-21138/13: address this question within its stated limits.
Case 25 — Maintenance question: how do I tell if an automatic actually needs service?
Clarifying question first: do you have a baseline? If you've never recorded the watch's rate or power reserve, 'drifting' is hard to judge. Start a simple log now with daily offset against a reference time for a week, and the hours it runs from full wind. Once you have that, later changes mean something.
Describe visible bridge shapes and markings separately from the proposed identification. Ask a qualified watchmaker to inspect it if identification matters for servicing; do not open the case merely for a forum answer.
Wrist size changes during the day and with temperature, sometimes by several millimetres. A fit that feels tight in the afternoon may be right in the morning. Before buying parts, check the fit at different times. You may find the 'too tight' setting is only a problem a few hours a day.
Summary draft for “Model comparison: dive bezel action and alignment, how to compare fairly”: the answer addresses “Separate three properties: click count (60 or 120 positions), feel (how…”; the related point is “Crisp vs mushy is mostly about…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Case 23 — Seller review template: facts, dates and unresolved questions
Method note for “Seller review template: facts, dates and unresolved questions”: use “Use fields for order date, promised terms, dated…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Lug width is the essential one: the inside distance between the lugs where the strap fits. Measure with a ruler marked in millimetres, ideally reading it under magnification. Most watches use even numbers (18, 20, 22mm), but odd widths exist. If you measure 19 or 21, measure again and check the manufacturer spec before ordering.