Case 39 — Case finishing: distinguish a reflection from a surface mark · source wording exercise
Limit of the answer in “Case finishing: distinguish a reflection from a surface mark”: “A mark should be assessed across multiple views; aggressive polishing…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: source wording. Retain the source wording beside any paraphrase.
Case 4 — Magnetism and rate: record evidence before naming a cause
Correction note for “Magnetism and rate: record evidence before naming a cause”: retain the wording beginning “Record the change and the circumstances without treating…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Jewel count describes bearings used in a movement design; it is not a quality ranking. Compare the documented movement architecture and service support rather than assuming a higher count makes one watch better.
Case 33 — QC photographs: perspective or a genuinely tilted index?
Clarification for “QC photographs: perspective or a genuinely tilted index?”: the point beginning “Request a level straight-on image with the hands…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Method note for “Magnetism and rate: record evidence before naming a cause”: use “Record the change and the circumstances without treating…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Clarifying question first: do you have a baseline? If you've never recorded the watch's rate or power reserve, 'drifting' is hard to judge. Start a simple log now with daily offset against a reference time for a week, and the hours it runs from full wind. Once you have that, later changes mean something.
Case 7 — Comparing versions without mixing case sizes
Two purported versions differ in case diameter and bracelet. How can the comparison avoid attributing every difference to a revision?
Exercise RWF-22126/7: address this question within its stated limits.
Case 27 — Service enquiry: information a watchmaker can use
A service question only says that the watch stops occasionally. Which observations make an initial enquiry more useful?
Exercise RWF-19829/27: address this question within its stated limits.
Case 14 — Date window centring: compare the same date at the same angle
Method note for “Date window centring: compare the same date at the same angle”: use “Use the same numeral, camera axis…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Method note for “Disputed observation: is this dial colour shift real or just lighting?”: use “Two photos of the same dial under different light can…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 52 — Comparing dial colour under different lighting · source wording exercise
Correction note for “Comparing dial colour under different lighting”: retain the wording beginning “Compare controlled images where available and avoid calling a…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Retain the source wording beside any paraphrase.
Jewel count describes bearings used in a movement design; it is not a quality ranking. Compare the documented movement architecture and service support rather than assuming a higher count makes one watch better.
Case 23 — Disputed observation: is this dial colour shift real or just lighting?
The difficulty is that phone cameras adjust white balance automatically, and blue dials are especially sensitive. Two photos of the same dial under different light can easily look like a 'batch difference'. Any comparison needs both dials in the same frame, under the same light, ideally next to a neutral grey or white reference card.
Case 14 — Beginner glossary Q&A: complication, caliber, jewel count, power reserve
Power reserve is how long the watch runs from full wind until it stops. It matters if you rotate watches: a 38-hour reserve may stop over a weekend off the wrist, while 70-plus hours may not. One clarifying point is that rate stability often gets worse near the end of the reserve, so the full figure is not all precision-grade running time.
Case 38 — Crystal types: sapphire, mineral and acrylic trade-offs for daily wear · source wording exercise
Correction note for “Crystal types: sapphire, mineral and acrylic trade-offs for daily wear”: retain the wording beginning “Sapphire is very hard to scratch but can chip or crack…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Retain the source wording beside any paraphrase.