Case 30 — Movement identification: the limits of a rotor photograph
Clarification for “Movement identification: the limits of a rotor photograph”: the point beginning “Describe visible bridge shapes and markings separately…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 22 — Beginner glossary Q&A: complication, caliber, jewel count, power reserve
A complication is any function beyond hours, minutes and seconds. A date window counts, technically, and so do a chronograph, GMT hand or moon phase. More complications usually mean more parts, more thickness and more service cost. For a first everyday watch, decide which functions you'd really use before treating them as value.
If the manufacturer provides a suitable procedure, a running-time log can support a service enquiry. State the winding method and stop time. A shortened run does not identify the cause by itself.
Case 38 — Magnetism and rate: record evidence before naming a cause · source wording exercise
Clarification for “Magnetism and rate: record evidence before naming a cause”: the point beginning “A competent watchmaker can test and diagnose it; random adjustment…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: source wording. Retain the source wording beside any paraphrase.
Case 28 — First QC request: the minimum useful information
Method note for “First QC request: the minimum useful information”: use “State the model configuration, the specific concern and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 32 — Bracelet fit: half-links, micro-adjust holes and the 'between sizes' problem
My bracelet is either slightly too tight or slightly loose with any link combination. The clasp has three micro-adjust holes, and there are no half-links. What are the options before I give up and go to a strap?
Exercise RWF-22115/32: address this question within its stated limits.
Record the change and the circumstances without treating the suspected cause as established. A competent watchmaker can test and diagnose it; random adjustment is not a substitute for assessment.
Case 15 — Strap dimensions: lug width, taper, thickness and spring bar diameter explained
Lug width is the essential one: the inside distance between the lugs where the strap fits. Measure with a ruler marked in millimetres, ideally reading it under magnification. Most watches use even numbers (18, 20, 22mm), but odd widths exist. If you measure 19 or 21, measure again and check the manufacturer spec before ordering.
Case 2 — QC photography: what photos actually help verify a pre-owned listing?
A dated note in the frame can support a claim that photographs are recent, but it is not conclusive proof of ownership, authenticity or an honest transaction. Treat it as one limited check alongside independent verification.
Case 40 — QC photographs: perspective or a genuinely tilted index? · source wording exercise
Summary draft for “QC photographs: perspective or a genuinely tilted index?”: the answer addresses “Compare two independently aligned images before drawing a conclusion; an overlay…”; the related point is “Request a level straight-on image with the hands…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: source wording. Retain the source wording beside any paraphrase.
Describe visible bridge shapes and markings separately from the proposed identification. Ask a qualified watchmaker to inspect it if identification matters for servicing; do not open the case merely for a forum answer.
Case 11 — A maintenance log that remains useful after a sale
Clarification for “A maintenance log that remains useful after a sale”: the point beginning “Keep the date, work performed, provider invoice reference…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 2 — Crown operation: when a forum cannot diagnose the resistance
Correction note for “Crown operation: when a forum cannot diagnose the resistance”: retain the wording beginning “Describe whether resistance occurs during winding or setting and…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Case 26 — First QC request: the minimum useful information
Correction note for “First QC request: the minimum useful information”: retain the wording beginning “State the model configuration, the specific concern and…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
No single lighting setup settles that question. Compare multiple controlled angles and describe the visible observation without asserting material specifications that have not been verified.