Case 24 — Model comparison: dive bezel action and alignment, how to compare fairly
Separate three properties: click count (60 or 120 positions), feel (how firm each click is, and whether there's back-play), and alignment (whether the pip lines up with the 12 o'clock marker at rest). Crisp vs mushy is mostly about feel and back-play. Alignment can be measured, so treat it separately.
Case 32 — Lug-to-lug and end-link overhang in wrist photographs
Correction note for “Lug-to-lug and end-link overhang in wrist photographs”: retain the wording beginning “Record lug-to-lug and the effective span…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Clarification for “Strap compatibility: width is only the first measurement”: the point beginning “Measure the lug opening and document bar diameter,…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 28 — Date window centring: compare the same date at the same angle
Different numerals have different optical centres. A comparison mixes two dates and unequal magnification. How can the evidence be improved?
Exercise RWF-28357/28: address this question within its stated limits.
Case 19 — Forum comparison archive: link the evidence and the correction
Summary draft for “Forum comparison archive: link the evidence and the correction”: the answer addresses “Add a dated correction near the original conclusion…”; the related point is “Preserve the reasoning trail instead of silently replacing an…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Method note for “First QC request: the minimum useful information”: use “Include complete instrument settings where relevant and say…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 35 — Comparing versions without mixing case sizes
Correction note for “Comparing versions without mixing case sizes”: retain the wording beginning “Match reference, dimensions and…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Case 26 — Crystal reflections: why a dark patch is not a coating test
A dark area appears at an oblique angle in a single photograph. Does that establish a coating difference?
Exercise RWF-23625/26: address this question within its stated limits.
Case 29 — Timegrapher reading context: what do rate, amplitude and beat error actually tell me?
The lift angle must match the movement specification for the amplitude reading to be meaningful. If it is unknown, label amplitude as provisional instead of accepting the instrument default.
Reader check for “Crown operation: when a forum cannot diagnose the resistance”: distinguish the discussion point “Describe whether resistance occurs during winding or setting and…” from its proposed application. The thread offers a way to reason about the question, without adding a personal experience or a newly observed outcome. Review focus: scope. Keep the stated question separate from any broader claim.
Case 12 — QC photography: what photos actually help verify a pre-owned listing?
A caution: photos can't settle everything. Water resistance, timekeeping and internal condition aren't visible in any image. A short timegrapher video or a stated recent rate test adds information, but treat it as a seller claim unless an independent party confirms it. Photos narrow the risk. They don't remove it.
Limit of the answer in “First QC request: the minimum useful information”: “State the model configuration, the specific concern and…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Method note for “Lug-to-lug and end-link overhang in wrist photographs”: use “Record lug-to-lug and the effective span…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 38 — Accuracy expectations: is -8 s/d acceptable on an entry-level automatic? · source wording exercise
Method note for “Accuracy expectations: is -8 s/d acceptable on an entry-level automatic?”: use “Comparing against a phone clock once a day for a week,…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Retain the source wording beside any paraphrase.
Case 49 — Comparing dial colour under different lighting · source wording exercise
One image was taken beside a window and the other under a warm lamp. How should a colour comparison be qualified?
Review focus: source wording. Retain the source wording beside any paraphrase. Use the original answer fragment “Compare controlled images where available and avoid calling a…” as the discussion anchor; no new event or result is supplied.
Exercise RWF-15133/49: address this question within its stated limits.