Method note for “Seller review template: facts, dates and unresolved questions”: use “Use fields for order date, promised terms, dated…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Forum Replies Created
The difficulty is that phone cameras adjust white balance automatically, and blue dials are especially sensitive. Two photos of the same dial under different light can easily look like a 'batch difference'. Any comparison needs both dials in the same frame, under the same light, ideally next to a neutral grey or white reference card.
Case 22 — Strap dimensions: lug width, taper, thickness and spring bar diameter explained
Summary order of importance. 1) Lug width, measured between the lugs. 2) Lug-end thickness against clearance. 3) Spring bar diameter. 4) Taper and buckle width. 5) Length, which is usually given as long side / short side in mm and should be compared with a strap that already fits you.
Case 30 — Movement identification: the limits of a rotor photograph
Summary draft for “Movement identification: the limits of a rotor photograph”: the answer addresses “Describe visible bridge shapes and markings separately…”; the related point is “Ask a qualified watchmaker to inspect it if identification matters for…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Ask a qualified watchmaker about a suitable test for that individual case and record the test date and method. A photograph or a caseback engraving is not proof of water resistance.
Case 25 — QC photographs: perspective or a genuinely tilted index?
Method note for “QC photographs: perspective or a genuinely tilted index?”: use “Request a level straight-on image with the hands…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 17 — Packing photographs: document condition without exposing an address
Clarification for “Packing photographs: document condition without exposing an address”: the point beginning “Photograph the item and protective packing…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Keep the date, work performed, provider invoice reference and test results where available. Redact addresses and payment information; do not invent service events to fill an empty history.
Case 32 — Comparing dial colour under different lighting
Summary draft for “Comparing dial colour under different lighting”: the answer addresses “State the lighting and…”; the related point is “Compare controlled images where available and avoid calling a…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Case 23 — Magnetism and rate: record evidence before naming a cause
Record the change and the circumstances without treating the suspected cause as established. A competent watchmaker can test and diagnose it; random adjustment is not a substitute for assessment.
Case 26 — First QC request: the minimum useful information
Correction note for “First QC request: the minimum useful information”: retain the wording beginning “State the model configuration, the specific concern and…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Measure the lug opening and document bar diameter, shoulder position and strap thickness. Avoid forcing an assembly that does not fit and let a watchmaker check uncertain clearances.
Case 9 — Comparison thread: 38mm vs 40mm versions of the same field watch, with a dated correction log
Summary so far. Rows: diameter, lug-to-lug, thickness (method stated), lug width, crystal type, water resistance (as specified), movement family, production period. Each row has a source tag. Corrections go in the dated log with old and new values. If nobody objects, that's the template, and later posts should give evidence rather than restate opinions.
Clarification for “Packing photographs: document condition without exposing an address”: the point beginning “Photograph the item and protective packing…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Clarification for “QC photographs: perspective or a genuinely tilted index?”: the point beginning “Request a level straight-on image with the hands…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.