Skip to content
RepWatchForumSign in

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 23 total)

Case 21 — Bracelet fit: half-links, micro-adjust holes and the 'between sizes' problem

Wrist size changes during the day and with temperature, sometimes by several millimetres. A fit that feels tight in the afternoon may be right in the morning. Before buying parts, check the fit at different times. You may find the 'too tight' setting is only a problem a few hours a day.

Case 29 — What a water-resistance claim does and does not establish

Ask a qualified watchmaker about a suitable test for that individual case and record the test date and method. A photograph or a caseback engraving is not proof of water resistance.

Correction note for “Date window centring: compare the same date at the same angle”: retain the wording beginning “Use the same numeral, camera axis…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.

Case 23 — Accuracy expectations: is -8 s/d acceptable on an entry-level automatic?

My entry-level automatic loses about 8 seconds a day. The spec sheet lists a tolerance range, but I'm not sure how to read it or whether my measurement is reliable. Is this something to fix or something to live with?

Exercise RWF-28357/23: address this question within its stated limits.

Case 14 — Clasp photographs: what to request before judging alignment

Correction note for “Clasp photographs: what to request before judging alignment”: retain the wording beginning “Request open and closed views from both sides,…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.

Clarification for “Comparing versions without mixing case sizes”: the point beginning “Match reference, dimensions and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.

Case 30 — Shipping timeline: separate dispatch, handover and scan events

Clarification for “Shipping timeline: separate dispatch, handover and scan events”: the point beginning “Distinguish label creation from physical acceptance and retain dated…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.

Case 20 — Comparing versions without mixing case sizes

Limit of the answer in “Comparing versions without mixing case sizes”: “Match reference, dimensions and…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.

Case 24 — Crystal reflections: why a dark patch is not a coating test

No single lighting setup settles that question. Compare multiple controlled angles and describe the visible observation without asserting material specifications that have not been verified.

Clarification for “Movement identification: the limits of a rotor photograph”: the point beginning “Describe visible bridge shapes and markings separately…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.

Case 7 — Forum comparison archive: link the evidence and the correction

Clarification for “Forum comparison archive: link the evidence and the correction”: the point beginning “Add a dated correction near the original conclusion…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.

Method note for “Comparing versions without mixing case sizes”: use “Match reference, dimensions and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.

Clarifying question: does anyone in the thread have access to both versions at once? Without simultaneous comparison, every claim either way is weak evidence. If not, the next best option is photos with a grey card in frame and white balance locked or set manually, which at least makes separate photos roughly comparable.

Case 32 — Maintenance question: how do I tell if an automatic actually needs service?

Keep a baseline log, describe changes in rate or running time and stop forcing rough winding. Follow the manufacturer’s guidance and arrange professional assessment when operation changes. A forum cannot prescribe a universal service interval.

Case 43 — Service enquiry: information a watchmaker can use · source wording exercise

Correction note for “Service enquiry: information a watchmaker can use”: retain the wording beginning “Be honest about the watch and request an assessment…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Retain the source wording beside any paraphrase.

Viewing 15 posts - 1 through 15 (of 23 total)