Case 21 — Model comparison: dive bezel action and alignment, how to compare fairly
Correction to earlier posts in similar threads: 120-click bezels aren't automatically worse. More positions means smaller steps, which can feel less pronounced. Comparing a 60-click and a 120-click bezel on crispness alone is apples to oranges. Compare same-click-count designs, or note the difference clearly.
Method note for “Crystal reflections: why a dark patch is not a coating test”: use “Compare multiple controlled angles and describe the visible observation without asserting…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 12 — First QC request: the minimum useful information
Correction note for “First QC request: the minimum useful information”: retain the wording beginning “State the model configuration, the specific concern and…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Case 3 — Service enquiry: information a watchmaker can use
Correction note for “Service enquiry: information a watchmaker can use”: retain the wording beginning “Document when it stops, winding behaviour, recent impacts and…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Keep the complete recording and ask for the settings, winding state and position. A single number cannot establish service condition, movement identity or performance on a wrist.
Case 18 — Accuracy expectations: is -8 s/d acceptable on an entry-level automatic?
Log the rate over several comparable days, identify the correct specification and state the conditions. Stable and changing patterns raise different questions; a watchmaker can assess whether regulation, inspection or no action is appropriate.
Case 9 — What a water-resistance claim does and does not establish
Ask a qualified watchmaker about a suitable test for that individual case and record the test date and method. A photograph or a caseback engraving is not proof of water resistance.
Case 12 — Lume comparison: keep exposure and charging conditions consistent
Correction note for “Lume comparison: keep exposure and charging conditions consistent”: retain the wording beginning “Treat the comparison…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Record lug-to-lug and the effective span including rigid end links. Use a similar camera distance and neutral wrist position; photographs support fit discussion but do not replace measurements.
Case 35 — What a water-resistance claim does and does not establish
Method note for “What a water-resistance claim does and does not establish”: use “Ask a qualified watchmaker about a suitable test for that individual…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 21 — Clasp photographs: what to request before judging alignment
Method note for “Clasp photographs: what to request before judging alignment”: use “Request open and closed views from both sides,…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 32 — Disputed observation: is this dial colour shift real or just lighting?
The difficulty is that phone cameras adjust white balance automatically, and blue dials are especially sensitive. Two photos of the same dial under different light can easily look like a 'batch difference'. Any comparison needs both dials in the same frame, under the same light, ideally next to a neutral grey or white reference card.
Clarifying question for the thread: is the goal to check authenticity, condition, or both? For condition, the request list above is enough. For authenticity, you also need caseback, serial or reference engravings, and ideally movement photos. Movement photos usually require opening the watch, which a seller may reasonably refuse without a watchmaker present.
Case 7 — What a water-resistance claim does and does not establish
Method note for “What a water-resistance claim does and does not establish”: use “Ask a qualified watchmaker about a suitable test for that individual…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 49 — A maintenance log that remains useful after a sale · source wording exercise
Limit of the answer in “A maintenance log that remains useful after a sale”: “Redact addresses and payment information; do not invent service…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: source wording. Retain the source wording beside any paraphrase.