Case 16 — Comparison thread: 38mm vs 40mm versions of the same field watch, with a dated correction log
Add lug-to-lug, thickness and lug width as separate rows. Diameter alone tells you little about wearability. Two cases 2mm apart in diameter can be within 1mm of each other lug to lug, and that number decides whether the watch overhangs a small wrist. Also give the source for each figure: manufacturer sheet, caliper measurement, or catalogue listing.
Case 21 — Model comparison: dive bezel action and alignment, how to compare fairly
On alignment, a clarifying point: is the misalignment visible straight on, or only from an angle? Parallax on a raised bezel can make a perfectly aligned pip look half a click off when viewed slightly from the side. Photograph straight above the dial before calling it misaligned.
Reader check for “Crystal reflections: why a dark patch is not a coating test”: distinguish the discussion point “No single lighting setup settles…” from its proposed application. The thread offers a way to reason about the question, without adding a personal experience or a newly observed outcome. Review focus: scope. Keep the stated question separate from any broader claim.
Case 12 — First QC request: the minimum useful information
Method note for “First QC request: the minimum useful information”: use “State the model configuration, the specific concern and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 3 — Service enquiry: information a watchmaker can use
Method note for “Service enquiry: information a watchmaker can use”: use “Document when it stops, winding behaviour, recent impacts and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Clarification for “QC photographs: perspective or a genuinely tilted index?”: the point beginning “Request a level straight-on image with the hands…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 18 — Accuracy expectations: is -8 s/d acceptable on an entry-level automatic?
Regulation is possible if you want it closer. On many movements it's a quick adjustment by a watchmaker. Can you check whether the losing rate is consistent or getting worse? A stable -8 is a good candidate for simple regulation. A growing loss points to something else, such as falling amplitude, and regulation alone won't fix that.
Case 8 — Date window centring: compare the same date at the same angle
Summary draft for “Date window centring: compare the same date at the same angle”: the answer addresses “Use the same numeral, camera axis…”; the related point is “Keep the uncropped originals alongside the detail crops and distinguish…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Case 12 — Lume comparison: keep exposure and charging conditions consistent
Method note for “Lume comparison: keep exposure and charging conditions consistent”: use “Treat the comparison…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Document when it stops, winding behaviour, recent impacts and the positions in which it happens. Be honest about the watch and request an assessment before approving work or ordering parts.
Case 35 — What a water-resistance claim does and does not establish
Ask a qualified watchmaker about a suitable test for that individual case and record the test date and method. A photograph or a caseback engraving is not proof of water resistance.
Use fields for order date, promised terms, dated communications, delivery evidence and resolution. Leave unsupported fields blank and separate observations from opinions; this reference is not a seller endorsement.
Case 21 — Clasp photographs: what to request before judging alignment
Request open and closed views from both sides, with the watch supported safely. Separate cosmetic alignment from whether the clasp engages reliably; functional concerns need hands-on inspection.
Case 31 — Strap dimensions: lug width, taper, thickness and spring bar diameter explained
Summary order of importance. 1) Lug width, measured between the lugs. 2) Lug-end thickness against clearance. 3) Spring bar diameter. 4) Taper and buckle width. 5) Length, which is usually given as long side / short side in mm and should be compared with a strap that already fits you.
Ask for a straight-on dial photo with diffuse light and no flash, the full dial in frame, and the hands placed away from the indices (10:10 isn't ideal, because it covers the upper markers). Flash flattens printing and hides lume condition. Diffuse light shows print edges, alignment and any spotting.