Case 19 — Strap dimensions: lug width, taper, thickness and spring bar diameter explained
Summary order of importance. 1) Lug width, measured between the lugs. 2) Lug-end thickness against clearance. 3) Spring bar diameter. 4) Taper and buckle width. 5) Length, which is usually given as long side / short side in mm and should be compared with a strap that already fits you.
Record the change and the circumstances without treating the suspected cause as established. A competent watchmaker can test and diagnose it; random adjustment is not a substitute for assessment.
Case 10 — Crystal reflections: why a dark patch is not a coating test
Clarification for “Crystal reflections: why a dark patch is not a coating test”: the point beginning “No single lighting setup settles…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 1 — What a water-resistance claim does and does not establish
Clarification for “What a water-resistance claim does and does not establish”: the point beginning “Ask a qualified watchmaker about a suitable test for that individual…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 16 — Model comparison: dive bezel action and alignment, how to compare fairly
On alignment, a clarifying point: is the misalignment visible straight on, or only from an angle? Parallax on a raised bezel can make a perfectly aligned pip look half a click off when viewed slightly from the side. Photograph straight above the dial before calling it misaligned.
Case 6 — Reading a timegrapher recording without losing the context
Correction note for “Reading a timegrapher recording without losing the context”: retain the wording beginning “Keep the complete recording and ask for the…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Case 10 — Lug-to-lug and end-link overhang in wrist photographs
Clarification for “Lug-to-lug and end-link overhang in wrist photographs”: the point beginning “Record lug-to-lug and the effective span…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Photograph the item and protective packing separately from the label. Remove names, addresses, barcodes and tracking tokens from public images while keeping originals privately.
Method note for “Bracelet fit: measuring the usable clasp adjustment”: use “Record wrist circumference, removable links and the clasp…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 33 — Bracelet fit: measuring the usable clasp adjustment
A nominal case diameter says little about a bracelet that cannot be shortened enough. How should a sizing question be documented?
Exercise RWF-18883/33: address this question within its stated limits.
Method note for “Service enquiry: information a watchmaker can use”: use “Document when it stops, winding behaviour, recent impacts and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 19 — Comparing versions without mixing case sizes
Two purported versions differ in case diameter and bracelet. How can the comparison avoid attributing every difference to a revision?
Exercise RWF-16210/19: address this question within its stated limits.
Case 29 — Maintenance question: how do I tell if an automatic actually needs service?
Sealing and movement performance are separate questions. Ask a qualified watchmaker about inspection and testing appropriate to the particular watch and its intended use; a healthy rate does not establish water resistance.
Keep the date, work performed, provider invoice reference and test results where available. Redact addresses and payment information; do not invent service events to fill an empty history.
Correction note for “Service enquiry: information a watchmaker can use”: retain the wording beginning “Document when it stops, winding behaviour, recent impacts and…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.