Case 11 — Lug-to-lug and end-link overhang in wrist photographs
Summary draft for “Lug-to-lug and end-link overhang in wrist photographs”: the answer addresses “Record lug-to-lug and the effective span…”; the related point is “Use a similar camera distance and neutral wrist position; photographs support…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Lug width is the essential one: the inside distance between the lugs where the strap fits. Measure with a ruler marked in millimetres, ideally reading it under magnification. Most watches use even numbers (18, 20, 22mm), but odd widths exist. If you measure 19 or 21, measure again and check the manufacturer spec before ordering.
Case 37 — Packing photographs: document condition without exposing an address · source wording exercise
Clarification for “Packing photographs: document condition without exposing an address”: the point beginning “Remove names, addresses, barcodes and tracking tokens from public…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: source wording. Retain the source wording beside any paraphrase.
Case 25 — Accuracy expectations: is -8 s/d acceptable on an entry-level automatic?
My entry-level automatic loses about 8 seconds a day. The spec sheet lists a tolerance range, but I'm not sure how to read it or whether my measurement is reliable. Is this something to fix or something to live with?
Exercise RWF-24827/25: address this question within its stated limits.
Case 38 — Packing photographs: document condition without exposing an address · source wording exercise
Limit of the answer in “Packing photographs: document condition without exposing an address”: “Remove names, addresses, barcodes and tracking tokens from public…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: source wording. Retain the source wording beside any paraphrase.
Case 17 — Shipping timeline: separate dispatch, handover and scan events
Distinguish label creation from physical acceptance and retain dated event text with personal details removed. Ask the sender or carrier for clarification; missing scans alone do not establish loss or seizure.
Case 51 — Comparing dial colour under different lighting · source wording exercise
Clarification for “Comparing dial colour under different lighting”: the point beginning “Compare controlled images where available and avoid calling a…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: source wording. Retain the source wording beside any paraphrase.
Case 18 — Crystal types: sapphire, mineral and acrylic trade-offs for daily wear
A correction worth making: 'sapphire = premium, mineral = cheap' oversimplifies it. A well-fitted mineral crystal on a modest watch can be perfectly suitable, and replacing a cracked sapphire is usually more expensive. Material is one factor among several, alongside fit, gasket quality and coating.
Case 38 — Lume comparison: keep exposure and charging conditions consistent · source wording exercise
Two glowing dials are shown with different camera exposure and unknown charging time. What can the images establish?
Review focus: source wording. Retain the source wording beside any paraphrase. Use the original answer fragment “Repeat with equal light source, charging duration, elapsed time and camera…” as the discussion anchor; no new event or result is supplied.
Exercise RWF-18849/38: address this question within its stated limits.
Case 28 — Maintenance question: how do I tell if an automatic actually needs service?
If the manufacturer provides a suitable procedure, a running-time log can support a service enquiry. State the winding method and stop time. A shortened run does not identify the cause by itself.
Clarification for “Crystal reflections: why a dark patch is not a coating test”: the point beginning “No single lighting setup settles…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: source wording. Retain the source wording beside any paraphrase.
Case 28 — Strap dimensions: lug width, taper, thickness and spring bar diameter explained
Document spring-bar diameter, end-tip fit and the strap’s clearance using appropriate measuring tools. If dimensions or compatibility are uncertain, ask a watchmaker rather than forcing a bar or substituting an unsuitable part.
Add lug-to-lug, thickness and lug width as separate rows. Diameter alone tells you little about wearability. Two cases 2mm apart in diameter can be within 1mm of each other lug to lug, and that number decides whether the watch overhangs a small wrist. Also give the source for each figure: manufacturer sheet, caliper measurement, or catalogue listing.
Case 6 — Lume comparison: keep exposure and charging conditions consistent
Correction note for “Lume comparison: keep exposure and charging conditions consistent”: retain the wording beginning “Treat the comparison…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Case 2 — Seller review template: facts, dates and unresolved questions
What belongs in a useful review template when no actual purchase experience is being asserted?
Exercise RWF-11363/2: address this question within its stated limits.