Case 3 — Crystal types: sapphire, mineral and acrylic trade-offs for daily wear
The core trade-off is scratch resistance versus shatter resistance. Sapphire is very hard to scratch but can chip or crack from a sharp impact on an edge. Acrylic scratches easily but flexes, rarely shatters, and light scratches can be polished out at home. Mineral glass sits in between and is often the cheapest to replace.
Clarification for “Case finishing: distinguish a reflection from a surface mark”: the point beginning “Ask for photographs with the light moved and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 27 — Shipping timeline: separate dispatch, handover and scan events
Limit of the answer in “Shipping timeline: separate dispatch, handover and scan events”: “Distinguish label creation from physical acceptance and retain dated…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Case 15 — Comparison thread: 38mm vs 40mm versions of the same field watch, with a dated correction log
Before the table goes live, a question: are you comparing current production only, or older references too? Dial printing, lume colour and crown signing often changed between batches. If older pieces are in scope, add a production-period column, or every disagreement will look like an error when it's really a running change.
Case 28 — Shipping timeline: separate dispatch, handover and scan events
Summary draft for “Shipping timeline: separate dispatch, handover and scan events”: the answer addresses “Distinguish label creation from physical acceptance and retain dated…”; the related point is “Ask the sender or carrier for clarification; missing scans alone…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Case 7 — QC photographs: perspective or a genuinely tilted index?
Limit of the answer in “QC photographs: perspective or a genuinely tilted index?”: “Request a level straight-on image with the hands…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Case 41 — Bracelet fit: measuring the usable clasp adjustment · source wording exercise
Correction note for “Bracelet fit: measuring the usable clasp adjustment”: retain the wording beginning “Request the closed bracelet circumference rather than inferring…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Retain the source wording beside any paraphrase.
Case 9 — Timegrapher reading context: what do rate, amplitude and beat error actually tell me?
First identify the caliber, lift-angle setting, winding state and measurement position. Without those fields, the rate, amplitude and beat-error values lack enough context for a useful comparison.
Case 28 — Crystal types: sapphire, mineral and acrylic trade-offs for daily wear
On anti-reflective coatings: inner-surface AR cuts glare without wear concerns. Outer-surface AR improves legibility further but can scuff over time, and the scuffs show up as hazy patches in certain light. When comparing two watches, check which surfaces are coated. Spec sheets often just say 'AR coated' without saying where.
Case 18 — Magnetism and rate: record evidence before naming a cause
Summary draft for “Magnetism and rate: record evidence before naming a cause”: the answer addresses “Record the change and the circumstances without treating…”; the related point is “A competent watchmaker can test and diagnose it; random adjustment…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Treat the comparison as inconclusive. Repeat with equal light source, charging duration, elapsed time and camera settings; disclose conditions rather than assigning an unsupported quality score.
Case 19 — Crystal reflections: why a dark patch is not a coating test
A dark area appears at an oblique angle in a single photograph. Does that establish a coating difference?
Exercise RWF-15100/19: address this question within its stated limits.
Batch variation on coloured dials does happen in general. Plating, lacquer thickness and supplier changes can all shift tone, so the claim isn't implausible. Plausible isn't the same as confirmed, though. The thread should keep 'possible' and 'shown' as separate statuses rather than letting repetition turn a hypothesis into accepted fact.
Case 11 — Date window centring: compare the same date at the same angle
Use the same numeral, camera axis and approximate image scale. Keep the uncropped originals alongside the detail crops and distinguish optical balance from physical window alignment.
Case 32 — Strap dimensions: lug width, taper, thickness and spring bar diameter explained
Thickness matters more than people expect. Straps around 4 to 5mm at the lugs can hit the case or stop the strap folding down on watches with short lugs or tight lug-to-case clearance. Do you know whether your watch has drilled lugs or a tight gap between strap and case? That tells you how much thickness is safe.