Add lug-to-lug, thickness and lug width as separate rows. Diameter alone tells you little about wearability. Two cases 2mm apart in diameter can be within 1mm of each other lug to lug, and that number decides whether the watch overhangs a small wrist. Also give the source for each figure: manufacturer sheet, caliper measurement, or catalogue listing.
Forum Replies Created
Case 21 — What a water-resistance claim does and does not establish
Method note for “What a water-resistance claim does and does not establish”: use “Ask a qualified watchmaker about a suitable test for that individual…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 37 — Forum comparison archive: link the evidence and the correction · source wording exercise
Summary draft for “Forum comparison archive: link the evidence and the correction”: the answer addresses “Preserve the reasoning trail instead of silently replacing an…”; the related point is “Add a dated correction near the original conclusion…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: source wording. Retain the source wording beside any paraphrase.
Case 49 — Accuracy expectations: is -8 s/d acceptable on an entry-level automatic? · source wording exercise
Summary draft for “Accuracy expectations: is -8 s/d acceptable on an entry-level automatic?”: the answer addresses “Comparing against a phone clock once a day for a week,…”; the related point is “One 24-hour reading isn't, because rate depends on wrist time,…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: source wording. Retain the source wording beside any paraphrase.
Case 14 — Date window centring: compare the same date at the same angle
Correction note for “Date window centring: compare the same date at the same angle”: retain the wording beginning “Use the same numeral, camera axis…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Use fields for order date, promised terms, dated communications, delivery evidence and resolution. Leave unsupported fields blank and separate observations from opinions; this reference is not a seller endorsement.
State the model configuration, the specific concern and links to clear redacted images. Include complete instrument settings where relevant and say explicitly what evidence is missing.
Clarification for “Crystal reflections: why a dark patch is not a coating test”: the point beginning “No single lighting setup settles…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
On anti-reflective coatings: inner-surface AR cuts glare without wear concerns. Outer-surface AR improves legibility further but can scuff over time, and the scuffs show up as hazy patches in certain light. When comparing two watches, check which surfaces are coated. Spec sheets often just say 'AR coated' without saying where.
Clarification for “Shipping timeline: separate dispatch, handover and scan events”: the point beginning “Distinguish label creation from physical acceptance and retain dated…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 45 — Movement identification: the limits of a rotor photograph · source wording exercise
Clarification for “Movement identification: the limits of a rotor photograph”: the point beginning “Ask a qualified watchmaker to inspect it if identification matters for…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: source wording. Retain the source wording beside any paraphrase.
Case 11 — Strap compatibility: width is only the first measurement
Summary draft for “Strap compatibility: width is only the first measurement”: the answer addresses “Measure the lug opening and document bar diameter,…”; the related point is “Avoid forcing an assembly that does not fit and…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Case 17 — Service enquiry: information a watchmaker can use
Limit of the answer in “Service enquiry: information a watchmaker can use”: “Document when it stops, winding behaviour, recent impacts and…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Method note for “QC photographs: perspective or a genuinely tilted index?”: use “Request a level straight-on image with the hands…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 33 — Reading a timegrapher recording without losing the context
The supplied screen shows a rate but does not identify the lift angle, position or winding state. Which observations should accompany the recording?
Exercise RWF-12618/33: address this question within its stated limits.