Case 3 — Strap compatibility: width is only the first measurement
Limit of the answer in “Strap compatibility: width is only the first measurement”: “Measure the lug opening and document bar diameter,…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Case 31 — QC photographs: perspective or a genuinely tilted index?
Limit of the answer in “QC photographs: perspective or a genuinely tilted index?”: “Request a level straight-on image with the hands…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Case 39 — Service enquiry: information a watchmaker can use · source wording exercise
Correction note for “Service enquiry: information a watchmaker can use”: retain the wording beginning “Be honest about the watch and request an assessment…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Retain the source wording beside any paraphrase.
Clarification for “Case finishing: distinguish a reflection from a surface mark”: the point beginning “Ask for photographs with the light moved and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Use fields for order date, promised terms, dated communications, delivery evidence and resolution. Leave unsupported fields blank and separate observations from opinions; this reference is not a seller endorsement.
Method note for “Comparing dial colour under different lighting”: use “State the lighting and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Retain the source wording beside any paraphrase.
Case 33 — QC photography: what photos actually help verify a pre-owned listing?
Ask for a straight-on dial photo with diffuse light and no flash, the full dial in frame, and the hands placed away from the indices (10:10 isn't ideal, because it covers the upper markers). Flash flattens printing and hides lume condition. Diffuse light shows print edges, alignment and any spotting.
Lug width is the essential one: the inside distance between the lugs where the strap fits. Measure with a ruler marked in millimetres, ideally reading it under magnification. Most watches use even numbers (18, 20, 22mm), but odd widths exist. If you measure 19 or 21, measure again and check the manufacturer spec before ordering.
Case 5 — Comparison thread: 38mm vs 40mm versions of the same field watch, with a dated correction log
A stated water-resistance rating does not establish the present condition of an individual watch. Separate the manufacturer specification from a dated inspection or test of the particular example.
Case 20 — Movement identification: the limits of a rotor photograph
Describe visible bridge shapes and markings separately from the proposed identification. Ask a qualified watchmaker to inspect it if identification matters for servicing; do not open the case merely for a forum answer.
Case 31 — QC checklist: prioritise observable faults over pixel hunting
Start with function, legibility, assembly and clear visible damage. Explain what the full-size image shows, what the crop adds and what remains uncertain; do not turn an overlay into an automatic verdict.
Case 23 — Crown operation: when a forum cannot diagnose the resistance
Clarification for “Crown operation: when a forum cannot diagnose the resistance”: the point beginning “Describe whether resistance occurs during winding or setting and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
The core trade-off is scratch resistance versus shatter resistance. Sapphire is very hard to scratch but can chip or crack from a sharp impact on an edge. Acrylic scratches easily but flexes, rarely shatters, and light scratches can be polished out at home. Mineral glass sits in between and is often the cheapest to replace.
Method note for “Accuracy expectations: is -8 s/d acceptable on an entry-level automatic?”: use “Start with how you…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 47 — Strap compatibility: width is only the first measurement · source wording exercise
Limit of the answer in “Strap compatibility: width is only the first measurement”: “Avoid forcing an assembly that does not fit and…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: source wording. Retain the source wording beside any paraphrase.