Case 31 — QC photographs: perspective or a genuinely tilted index?
Request a level straight-on image with the hands clear of the marker. Compare two independently aligned images before drawing a conclusion; an overlay cannot correct an oblique camera angle.
Case 2 — Lug-to-lug and end-link overhang in wrist photographs
Summary draft for “Lug-to-lug and end-link overhang in wrist photographs”: the answer addresses “Record lug-to-lug and the effective span…”; the related point is “Use a similar camera distance and neutral wrist position; photographs support…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Case 38 — Movement identification: the limits of a rotor photograph · source wording exercise
Correction note for “Movement identification: the limits of a rotor photograph”: retain the wording beginning “Ask a qualified watchmaker to inspect it if identification matters for…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Retain the source wording beside any paraphrase.
Clarification for “Shipping timeline: separate dispatch, handover and scan events”: the point beginning “Distinguish label creation from physical acceptance and retain dated…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Method note for “Strap compatibility: width is only the first measurement”: use “Measure the lug opening and document bar diameter,…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 27 — Crystal reflections: why a dark patch is not a coating test
Correction note for “Crystal reflections: why a dark patch is not a coating test”: retain the wording beginning “No single lighting setup settles…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Case 43 — Lume questions: why does my lume fade so quickly, and how should I compare it? · source wording exercise
My watch's lume is bright for a few minutes and then barely visible. Is that normal? People post lume shots of different watches, but they all seem to use different charging and exposure, so I can't tell what's actually better.
Review focus: source wording. Retain the source wording beside any paraphrase. Use the original answer fragment “Afterglow fades fastest in the first minutes and then settles to…” as the discussion anchor; no new event or result is supplied.
Exercise RWF-29092/43: address this question within its stated limits.
Clarification for “Comparing dial colour under different lighting”: the point beginning “State the lighting and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: source wording. Retain the source wording beside any paraphrase.
Case 10 — Disputed observation: is this dial colour shift real or just lighting?
Batch variation on coloured dials does happen in general. Plating, lacquer thickness and supplier changes can all shift tone, so the claim isn't implausible. Plausible isn't the same as confirmed, though. The thread should keep 'possible' and 'shown' as separate statuses rather than letting repetition turn a hypothesis into accepted fact.
Case 21 — Service enquiry: information a watchmaker can use
A service question only says that the watch stops occasionally. Which observations make an initial enquiry more useful?
Exercise RWF-25919/21: address this question within its stated limits.
Use the same numeral, camera axis and approximate image scale. Keep the uncropped originals alongside the detail crops and distinguish optical balance from physical window alignment.
Case 13 — Date window centring: compare the same date at the same angle
Use the same numeral, camera axis and approximate image scale. Keep the uncropped originals alongside the detail crops and distinguish optical balance from physical window alignment.
Case 38 — Comparing versions without mixing case sizes · source wording exercise
Method note for “Comparing versions without mixing case sizes”: use “List confirmed differences separately from seller descriptions and date the comparison…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Retain the source wording beside any paraphrase.
Case 39 — Beginner glossary Q&A: complication, caliber, jewel count, power reserve · source wording exercise
Correction note for “Beginner glossary Q&A: complication, caliber, jewel count, power reserve”: retain the wording beginning “Two watches from different brands can share the same caliber…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Retain the source wording beside any paraphrase.
A complication is any function beyond hours, minutes and seconds. A date window counts, technically, and so do a chronograph, GMT hand or moon phase. More complications usually mean more parts, more thickness and more service cost. For a first everyday watch, decide which functions you'd really use before treating them as value.