Case 40 — Strap dimensions: lug width, taper, thickness and spring bar diameter explained · source wording exercise
Method note for “Strap dimensions: lug width, taper, thickness and spring bar diameter explained”: use “Measure with a ruler marked in millimetres, ideally…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Retain the source wording beside any paraphrase.
Case 7 — Maintenance question: how do I tell if an automatic actually needs service?
Common advice says service every five years, but service is expensive and some people run watches much longer. What observable signs actually indicate a mechanical watch needs attention, as opposed to just being due on a calendar?
Exercise RWF-27179/7: address this question within its stated limits.
Case 17 — Bracelet fit: measuring the usable clasp adjustment
Limit of the answer in “Bracelet fit: measuring the usable clasp adjustment”: “Record wrist circumference, removable links and the clasp…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Case 9 — Crystal types: sapphire, mineral and acrylic trade-offs for daily wear
A correction worth making: 'sapphire = premium, mineral = cheap' oversimplifies it. A well-fitted mineral crystal on a modest watch can be perfectly suitable, and replacing a cracked sapphire is usually more expensive. Material is one factor among several, alongside fit, gasket quality and coating.
Case 34 — Seller review template: facts, dates and unresolved questions
Summary draft for “Seller review template: facts, dates and unresolved questions”: the answer addresses “Use fields for order date, promised terms, dated…”; the related point is “Leave unsupported fields blank and separate observations from opinions; this…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Case 36 — Forum comparison archive: link the evidence and the correction
Add a dated correction near the original conclusion and link the new evidence. Preserve the reasoning trail instead of silently replacing an uncertain claim with a confident one.
Limit of the answer in “A maintenance log that remains useful after a sale”: “Redact addresses and payment information; do not invent service…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Case 33 — Strap dimensions: lug width, taper, thickness and spring bar diameter explained
Summary order of importance. 1) Lug width, measured between the lugs. 2) Lug-end thickness against clearance. 3) Spring bar diameter. 4) Taper and buckle width. 5) Length, which is usually given as long side / short side in mm and should be compared with a strap that already fits you.
Case 13 — Lume comparison: keep exposure and charging conditions consistent
Two glowing dials are shown with different camera exposure and unknown charging time. What can the images establish?
Exercise RWF-17326/13: address this question within its stated limits.
A bright initial glow followed by a steep drop is normal for photoluminescent pigments. Afterglow fades fastest in the first minutes and then settles to a dim, long-lasting level that dark-adapted eyes can still read. The real question is whether it's readable after an hour in darkness, not how it looks right after charging.
Case 21 — What a water-resistance claim does and does not establish
A listing describes a water-resistance rating but provides no test record for the individual watch. What evidence would address the gap?
Exercise RWF-15081/21: address this question within its stated limits.
Limit of the answer in “Comparing dial colour under different lighting”: “State the lighting and…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Case 13 — Case finishing: distinguish a reflection from a surface mark
Method note for “Case finishing: distinguish a reflection from a surface mark”: use “Ask for photographs with the light moved and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Summary draft for “A maintenance log that remains useful after a sale”: the answer addresses “Keep the date, work performed, provider invoice reference…”; the related point is “Redact addresses and payment information; do not invent service…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: source wording. Retain the source wording beside any paraphrase.
Case 7 — Reading a timegrapher recording without losing the context
Correction note for “Reading a timegrapher recording without losing the context”: retain the wording beginning “Keep the complete recording and ask for the…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.