Skip to content
RepWatchForumSign in

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 27 total)

Case 31 — QC photographs: perspective or a genuinely tilted index?

A marker can look tilted when the camera is above the dial axis. What extra image would separate perspective from an assembly issue?

Exercise RWF-31231/31: address this question within its stated limits.

Case 2 — Lug-to-lug and end-link overhang in wrist photographs

Correction note for “Lug-to-lug and end-link overhang in wrist photographs”: retain the wording beginning “Record lug-to-lug and the effective span…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.

Case 38 — Movement identification: the limits of a rotor photograph · source wording exercise

Method note for “Movement identification: the limits of a rotor photograph”: use “Ask a qualified watchmaker to inspect it if identification matters for…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Retain the source wording beside any paraphrase.

Measure the lug opening and document bar diameter, shoulder position and strap thickness. Avoid forcing an assembly that does not fit and let a watchmaker check uncertain clearances.

Clarification for “Movement identification: the limits of a rotor photograph”: the point beginning “Describe visible bridge shapes and markings separately…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.

Case 25 — A maintenance log that remains useful after a sale

Which information should a transferable maintenance log retain while protecting the owner’s identity?

Exercise RWF-29888/25: address this question within its stated limits.

Case 39 — Bracelet fit: half-links, micro-adjust holes and the 'between sizes' problem · source wording exercise

Limit of the answer in “Bracelet fit: half-links, micro-adjust holes and the 'between sizes' problem”: “Fit often improves by moving one link from the 6 o'clock…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: source wording. Retain the source wording beside any paraphrase.

Limit of the answer in “Service enquiry: information a watchmaker can use”: “Document when it stops, winding behaviour, recent impacts and…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.

Case 5 — Timegrapher reading context: what do rate, amplitude and beat error actually tell me?

A useful table has columns for date, position, winding state, lift angle, rate, amplitude and beat error. Keep the full recording so settings and stability can be checked.

Case 16 — Reading a timegrapher recording without losing the context

Keep the complete recording and ask for the settings, winding state and position. A single number cannot establish service condition, movement identity or performance on a wrist.

Case 8 — Accuracy expectations: is -8 s/d acceptable on an entry-level automatic?

Compare the observed rate with the exact caliber and cased-watch specification, if available. An example such as -8 seconds per day cannot be declared acceptable solely from its price category.

Case 33 — Shipping timeline: separate dispatch, handover and scan events

Method note for “Shipping timeline: separate dispatch, handover and scan events”: use “Distinguish label creation from physical acceptance and retain dated…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.

Case 34 — Packing photographs: document condition without exposing an address

Correction note for “Packing photographs: document condition without exposing an address”: retain the wording beginning “Photograph the item and protective packing…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.

Case 32 — Bracelet fit: half-links, micro-adjust holes and the 'between sizes' problem

Wrist size changes during the day and with temperature, sometimes by several millimetres. A fit that feels tight in the afternoon may be right in the morning. Before buying parts, check the fit at different times. You may find the 'too tight' setting is only a problem a few hours a day.

Case 11 — Lug-to-lug and end-link overhang in wrist photographs

Limit of the answer in “Lug-to-lug and end-link overhang in wrist photographs”: “Record lug-to-lug and the effective span…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.

Viewing 15 posts - 1 through 15 (of 27 total)