Clarification for “Date window centring: compare the same date at the same angle”: the point beginning “Use the same numeral, camera axis…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Forum Replies Created
Case 24 — Magnetism and rate: record evidence before naming a cause
Record the change and the circumstances without treating the suspected cause as established. A competent watchmaker can test and diagnose it; random adjustment is not a substitute for assessment.
Case 38 — Maintenance question: how do I tell if an automatic actually needs service? · source wording exercise
Method note for “Maintenance question: how do I tell if an automatic actually needs service?”: use “Useful signs, in rough order of seriousness: power reserve noticeably shorter…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Retain the source wording beside any paraphrase.
Case 114 — Shipping timeline: separate dispatch, handover and scan events · documentation exercise
Clarification for “Shipping timeline: separate dispatch, handover and scan events”: the point beginning “Ask the sender or carrier for clarification; missing scans alone…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: documentation. Distinguish an original record from a proposed record format.
Case 4 — Beginner glossary Q&A: complication, caliber, jewel count, power reserve
New here and reading spec sheets for the first time. Four terms keep tripping me up: complication, caliber, jewel count and power reserve. Short definitions would help, and so would a note on which ones actually matter when comparing two everyday watches.
Exercise RWF-27179/4: address this question within its stated limits.
Case 14 — Crystal types: sapphire, mineral and acrylic trade-offs for daily wear
On anti-reflective coatings: inner-surface AR cuts glare without wear concerns. Outer-surface AR improves legibility further but can scuff over time, and the scuffs show up as hazy patches in certain light. When comparing two watches, check which surfaces are coated. Spec sheets often just say 'AR coated' without saying where.
Case 6 — Model comparison: dive bezel action and alignment, how to compare fairly
Separate preference from a potential functional problem. Inconsistent engagement, slipping or uncertain alignment should be documented and checked against the design’s specification by a competent watchmaker; do not invent a universal defect threshold.
Case 31 — Strap compatibility: width is only the first measurement
Correction note for “Strap compatibility: width is only the first measurement”: retain the wording beginning “Measure the lug opening and document bar diameter,…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Case 33 — A maintenance log that remains useful after a sale
Which information should a transferable maintenance log retain while protecting the owner’s identity?
Exercise RWF-20916/33: address this question within its stated limits.
Case 30 — QC photography: what photos actually help verify a pre-owned listing?
A caution: photos can't settle everything. Water resistance, timekeeping and internal condition aren't visible in any image. A short timegrapher video or a stated recent rate test adds information, but treat it as a seller claim unless an independent party confirms it. Photos narrow the risk. They don't remove it.
Case 9 — Movement identification: the limits of a rotor photograph
Summary draft for “Movement identification: the limits of a rotor photograph”: the answer addresses “Describe visible bridge shapes and markings separately…”; the related point is “Ask a qualified watchmaker to inspect it if identification matters for…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
State whether thickness includes the highest point of a domed crystal. Different measurement methods can produce different figures, so keep both the source and method beside each dimension.
Case 17 — QC photographs: perspective or a genuinely tilted index?
Summary draft for “QC photographs: perspective or a genuinely tilted index?”: the answer addresses “Request a level straight-on image with the hands…”; the related point is “Compare two independently aligned images before drawing a conclusion; an overlay…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Clarification for “Strap compatibility: width is only the first measurement”: the point beginning “Measure the lug opening and document bar diameter,…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Clarification for “QC photographs: perspective or a genuinely tilted index?”: the point beginning “Compare two independently aligned images before drawing a conclusion; an overlay…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.