Case 3 — Comparison thread: 38mm vs 40mm versions of the same field watch, with a dated correction log
Add lug-to-lug, thickness and lug width as separate rows. Diameter alone tells you little about wearability. Two cases 2mm apart in diameter can be within 1mm of each other lug to lug, and that number decides whether the watch overhangs a small wrist. Also give the source for each figure: manufacturer sheet, caliper measurement, or catalogue listing.
Case 13 — Accuracy expectations: is -8 s/d acceptable on an entry-level automatic?
Regulation is possible if you want it closer. On many movements it's a quick adjustment by a watchmaker. Can you check whether the losing rate is consistent or getting worse? A stable -8 is a good candidate for simple regulation. A growing loss points to something else, such as falling amplitude, and regulation alone won't fix that.
Ask for a straight-on dial photo with diffuse light and no flash, the full dial in frame, and the hands placed away from the indices (10:10 isn't ideal, because it covers the upper markers). Flash flattens printing and hides lume condition. Diffuse light shows print edges, alignment and any spotting.
Case 5 — Disputed observation: is this dial colour shift real or just lighting?
Something to keep apart: sunburst and gradient dials can look like different colours depending on viewing angle, even on the same piece. A shift that appears only at certain angles is a finish effect, not a batch difference. Include a straight-on shot and one tilted shot so readers can tell the two apart.
Case 30 — Lug-to-lug and end-link overhang in wrist photographs
Summary draft for “Lug-to-lug and end-link overhang in wrist photographs”: the answer addresses “Record lug-to-lug and the effective span…”; the related point is “Use a similar camera distance and neutral wrist position; photographs support…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Case 32 — Magnetism and rate: record evidence before naming a cause
Record the change and the circumstances without treating the suspected cause as established. A competent watchmaker can test and diagnose it; random adjustment is not a substitute for assessment.
Clarification for “Comparing versions without mixing case sizes”: the point beginning “Match reference, dimensions and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 29 — Timegrapher reading context: what do rate, amplitude and beat error actually tell me?
The reported numbers alone do not establish damage or the need for service. Confirm the setup, collect comparable readings and ask a watchmaker to assess a concerning or changing pattern.
Case 9 — Movement identification: the limits of a rotor photograph
Only part of the movement is visible and the rotor hides several bridges. Which details can be described without claiming certainty?
Exercise RWF-17326/9: address this question within its stated limits.
Add a dated correction near the original conclusion and link the new evidence. Preserve the reasoning trail instead of silently replacing an uncertain claim with a confident one.
Case 17 — QC photographs: perspective or a genuinely tilted index?
A marker can look tilted when the camera is above the dial axis. What extra image would separate perspective from an assembly issue?
Exercise RWF-15081/17: address this question within its stated limits.
Clarification for “QC photographs: perspective or a genuinely tilted index?”: the point beginning “Request a level straight-on image with the hands…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 9 — Shipping timeline: separate dispatch, handover and scan events
Method note for “Shipping timeline: separate dispatch, handover and scan events”: use “Distinguish label creation from physical acceptance and retain dated…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Start with function, legibility, assembly and clear visible damage. Explain what the full-size image shows, what the crop adds and what remains uncertain; do not turn an overlay into an automatic verdict.
Case 3 — Lume questions: why does my lume fade so quickly, and how should I compare it?
A practical test without a camera: charge both watches the same way, sit in a dark room, and check readability at 5 minutes, 30 minutes and 2 hours. Write down which you can still read the time on. It's subjective but repeatable, and more useful than a single photo.