Case 110 — Service enquiry: information a watchmaker can use · documentation exercise
Reader check for “Service enquiry: information a watchmaker can use”: distinguish the discussion point “Be honest about the watch and request an assessment…” from its proposed application. The thread offers a way to reason about the question, without adding a personal experience or a newly observed outcome. Review focus: documentation. Distinguish an original record from a proposed record format.
Case 10 — Disputed observation: is this dial colour shift real or just lighting?
Clarifying question: does anyone in the thread have access to both versions at once? Without simultaneous comparison, every claim either way is weak evidence. If not, the next best option is photos with a grey card in frame and white balance locked or set manually, which at least makes separate photos roughly comparable.
Summary draft for “Packing photographs: document condition without exposing an address”: the answer addresses “Remove names, addresses, barcodes and tracking tokens from public…”; the related point is “Photograph the item and protective packing…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Case 2 — Maintenance question: how do I tell if an automatic actually needs service?
Clarifying question first: do you have a baseline? If you've never recorded the watch's rate or power reserve, 'drifting' is hard to judge. Start a simple log now with daily offset against a reference time for a week, and the hours it runs from full wind. Once you have that, later changes mean something.
Case 27 — What a water-resistance claim does and does not establish
Method note for “What a water-resistance claim does and does not establish”: use “Ask a qualified watchmaker about a suitable test for that individual…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 28 — Case finishing: distinguish a reflection from a surface mark
Correction note for “Case finishing: distinguish a reflection from a surface mark”: retain the wording beginning “Ask for photographs with the light moved and…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Reader check for “Lume comparison: keep exposure and charging conditions consistent”: distinguish the discussion point “Treat the comparison…” from its proposed application. The thread offers a way to reason about the question, without adding a personal experience or a newly observed outcome. Review focus: scope. Keep the stated question separate from any broader claim.
Case 26 — First QC request: the minimum useful information
Method note for “First QC request: the minimum useful information”: use “State the model configuration, the specific concern and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 5 — Reading a timegrapher recording without losing the context
Limit of the answer in “Reading a timegrapher recording without losing the context”: “Keep the complete recording and ask for the…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Clarification for “Comparing versions without mixing case sizes”: the point beginning “Match reference, dimensions and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 13 — Model comparison: dive bezel action and alignment, how to compare fairly
Separate preference from a potential functional problem. Inconsistent engagement, slipping or uncertain alignment should be documented and checked against the design’s specification by a competent watchmaker; do not invent a universal defect threshold.
Method note for “QC photographs: perspective or a genuinely tilted index?”: use “Request a level straight-on image with the hands…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Lug width is the essential one: the inside distance between the lugs where the strap fits. Measure with a ruler marked in millimetres, ideally reading it under magnification. Most watches use even numbers (18, 20, 22mm), but odd widths exist. If you measure 19 or 21, measure again and check the manufacturer spec before ordering.
Clarifying question: what does daily wear mean for you? Desk work, manual labour or sports change the answer. For desk use, sapphire's scratch resistance is the main benefit. For work with frequent knocks, a slightly domed acrylic that you can polish may last longer in practice, despite the scratches.
Case 6 — Lug-to-lug and end-link overhang in wrist photographs
A wide-angle wrist photo exaggerates the nearest edge of the case. How can two watches be compared fairly?
Exercise RWF-10059/6: address this question within its stated limits.