Case 21 — Comparing versions without mixing case sizes
Summary draft for “Comparing versions without mixing case sizes”: the answer addresses “Match reference, dimensions and…”; the related point is “List confirmed differences separately from seller descriptions and date the comparison…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Case 35 — Beginner glossary Q&A: complication, caliber, jewel count, power reserve
Power reserve is how long the watch runs from full wind until it stops. It matters if you rotate watches: a 38-hour reserve may stop over a weekend off the wrist, while 70-plus hours may not. One clarifying point is that rate stability often gets worse near the end of the reserve, so the full figure is not all precision-grade running time.
Case 110 — Service enquiry: information a watchmaker can use · documentation exercise
Limit of the answer in “Service enquiry: information a watchmaker can use”: “Be honest about the watch and request an assessment…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: documentation. Distinguish an original record from a proposed record format.
Clarification for “A maintenance log that remains useful after a sale”: the point beginning “Keep the date, work performed, provider invoice reference…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 9 — Strap dimensions: lug width, taper, thickness and spring bar diameter explained
Summary order of importance. 1) Lug width, measured between the lugs. 2) Lug-end thickness against clearance. 3) Spring bar diameter. 4) Taper and buckle width. 5) Length, which is usually given as long side / short side in mm and should be compared with a strap that already fits you.
Method note for “Packing photographs: document condition without exposing an address”: use “Remove names, addresses, barcodes and tracking tokens from public…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 1 — QC photography: what photos actually help verify a pre-owned listing?
Proposed reusable request list. 1) Straight dial, diffuse light, hands clear of markers. 2) Both case profiles. 3) Lug tops at an angle. 4) Caseback and engravings. 5) Clasp and bracelet end links. 6) Dated note in frame. Optional: timegrapher reading or movement photos. Add or change items with a reason, and I'll keep the list current.
Case 27 — What a water-resistance claim does and does not establish
A listing describes a water-resistance rating but provides no test record for the individual watch. What evidence would address the gap?
Exercise RWF-21987/27: address this question within its stated limits.
Case 28 — Case finishing: distinguish a reflection from a surface mark
Clarification for “Case finishing: distinguish a reflection from a surface mark”: the point beginning “Ask for photographs with the light moved and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Limit of the answer in “Lume comparison: keep exposure and charging conditions consistent”: “Treat the comparison…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Case 26 — First QC request: the minimum useful information
What should an initial QC request include so replies can address the actual question?
Exercise RWF-18803/26: address this question within its stated limits.
Case 5 — Reading a timegrapher recording without losing the context
Keep the complete recording and ask for the settings, winding state and position. A single number cannot establish service condition, movement identity or performance on a wrist.
Ask for photographs with the light moved and retain the same viewing angle. A mark should be assessed across multiple views; aggressive polishing is not an appropriate diagnostic test.
Case 13 — Model comparison: dive bezel action and alignment, how to compare fairly
Separate three properties: click count (60 or 120 positions), feel (how firm each click is, and whether there's back-play), and alignment (whether the pip lines up with the 12 o'clock marker at rest). Crisp vs mushy is mostly about feel and back-play. Alignment can be measured, so treat it separately.
Micro-adjust spacing varies by clasp. Measure the actual change at each setting rather than assuming a standard number of millimetres; compare the usable range with the link length.