Case 18 — Comparing dial colour under different lighting
Method note for “Comparing dial colour under different lighting”: use “State the lighting and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 31 — Crystal reflections: why a dark patch is not a coating test
Limit of the answer in “Crystal reflections: why a dark patch is not a coating test”: “No single lighting setup settles…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Case 105 — Reading a timegrapher recording without losing the context · comparison exercise
Clarification for “Reading a timegrapher recording without losing the context”: the point beginning “Keep the complete recording and ask for the…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: comparison. Make the basis of a comparison explicit before interpreting it.
Case 3 — Comparison thread: 38mm vs 40mm versions of the same field watch, with a dated correction log
Use a correction row with date, old value, revised value and evidence. A worked example could change a lug-width entry from 20 to 22 mm; do not present that example as a correction to a real model.
Correction note for “Shipping timeline: separate dispatch, handover and scan events”: retain the wording beginning “Distinguish label creation from physical acceptance and retain dated…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Case 20 — Lume questions: why does my lume fade so quickly, and how should I compare it?
A practical test without a camera: charge both watches the same way, sit in a dark room, and check readability at 5 minutes, 30 minutes and 2 hours. Write down which you can still read the time on. It's subjective but repeatable, and more useful than a single photo.
Case 22 — Strap compatibility: width is only the first measurement
Two straps share the same nominal width but differ in thickness and spring-bar clearance. Which dimensions need checking?
Exercise RWF-20916/22: address this question within its stated limits.
Back-play is the most objective feel measurement. Set the bezel on a click and gently push it the other way without forcing it. Noticeable wobble before it engages means play. A little is common and within normal production, but if one model has visible movement and the other doesn't, that's a real difference you can describe.
Case 19 — QC checklist: prioritise observable faults over pixel hunting
Correction note for “QC checklist: prioritise observable faults over pixel hunting”: retain the wording beginning “Start with function, legibility, assembly and…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Something to keep apart: sunburst and gradient dials can look like different colours depending on viewing angle, even on the same piece. A shift that appears only at certain angles is a finish effect, not a batch difference. Include a straight-on shot and one tilted shot so readers can tell the two apart.
Case 47 — Packing photographs: document condition without exposing an address · source wording exercise
Clarification for “Packing photographs: document condition without exposing an address”: the point beginning “Remove names, addresses, barcodes and tracking tokens from public…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: source wording. Retain the source wording beside any paraphrase.
Case 6 — Beginner glossary Q&A: complication, caliber, jewel count, power reserve
One more term that will come up is 'hacking', meaning the seconds hand stops when you pull the crown so you can set the time to the second. It's minor, but beginners often assume every automatic has it, and not all do. That rounds out the glossary: caliber means what, complication means extra functions, jewels mean bearings, power reserve means how long it runs, hacking means precise setting.
Limit of the answer in “Crystal reflections: why a dark patch is not a coating test”: “Compare multiple controlled angles and describe the visible observation without asserting…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Request open and closed views from both sides, with the watch supported safely. Separate cosmetic alignment from whether the clasp engages reliably; functional concerns need hands-on inspection.
A correction to a common belief: an automatic doesn't need to match a quartz watch to be healthy. Consistency matters more than the absolute figure. A watch that's reliably -8 every day is easy to live with, since you correct it once a week. One that swings from +10 to -15 is the real concern.