Case 40 — Service enquiry: information a watchmaker can use · source wording exercise
Method note for “Service enquiry: information a watchmaker can use”: use “Be honest about the watch and request an assessment…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Retain the source wording beside any paraphrase.
Method note for “First QC request: the minimum useful information”: use “Include complete instrument settings where relevant and say…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 10 — What a water-resistance claim does and does not establish
Summary draft for “What a water-resistance claim does and does not establish”: the answer addresses “Ask a qualified watchmaker about a suitable test for that individual…”; the related point is “A photograph or a caseback engraving is not…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Case 22 — Comparing dial colour under different lighting
State the lighting and white-balance limitations. Compare controlled images where available and avoid calling a colour defect from differently processed photographs.
Case 93 — Beginner glossary Q&A: complication, caliber, jewel count, power reserve · comparison exercise
Summary draft for “Beginner glossary Q&A: complication, caliber, jewel count, power reserve”: the answer addresses “On a spec sheet it tells you what's inside and…”; the related point is “It doesn't tell you how well that…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: comparison. Make the basis of a comparison explicit before interpreting it.
Case 29 — Comparing versions without mixing case sizes
Clarification for “Comparing versions without mixing case sizes”: the point beginning “Match reference, dimensions and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 282 — Reading a timegrapher recording without losing the context · reader check exercise
Clarification for “Reading a timegrapher recording without losing the context”: the point beginning “A single number cannot establish service condition, movement identity…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: reader check. State what a new reader can and cannot infer from this exercise.
Reader check for “Comparing versions without mixing case sizes”: distinguish the discussion point “Match reference, dimensions and…” from its proposed application. The thread offers a way to reason about the question, without adding a personal experience or a newly observed outcome. Review focus: scope. Keep the stated question separate from any broader claim.
Case 25 — Model comparison: dive bezel action and alignment, how to compare fairly
On alignment, a clarifying point: is the misalignment visible straight on, or only from an angle? Parallax on a raised bezel can make a perfectly aligned pip look half a click off when viewed slightly from the side. Photograph straight above the dial before calling it misaligned.
Case 7 — Packing photographs: document condition without exposing an address
Limit of the answer in “Packing photographs: document condition without exposing an address”: “Photograph the item and protective packing…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Case 8 — Strap dimensions: lug width, taper, thickness and spring bar diameter explained
Summary order of importance. 1) Lug width, measured between the lugs. 2) Lug-end thickness against clearance. 3) Spring bar diameter. 4) Taper and buckle width. 5) Length, which is usually given as long side / short side in mm and should be compared with a strap that already fits you.
Case 46 — Accuracy expectations: is -8 s/d acceptable on an entry-level automatic? · source wording exercise
Correction note for “Accuracy expectations: is -8 s/d acceptable on an entry-level automatic?”: retain the wording beginning “Comparing against a phone clock once a day for a week,…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Retain the source wording beside any paraphrase.
Case 6 — Date window centring: compare the same date at the same angle
Limit of the answer in “Date window centring: compare the same date at the same angle”: “Use the same numeral, camera axis…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Case 21 — Comparing dial colour under different lighting
One image was taken beside a window and the other under a warm lamp. How should a colour comparison be qualified?
Exercise RWF-17321/21: address this question within its stated limits.
Case 34 — Lug-to-lug and end-link overhang in wrist photographs
A wide-angle wrist photo exaggerates the nearest edge of the case. How can two watches be compared fairly?
Exercise RWF-16079/34: address this question within its stated limits.