Case 12 — Accuracy expectations: is -8 s/d acceptable on an entry-level automatic?
A correction to a common belief: an automatic doesn't need to match a quartz watch to be healthy. Consistency matters more than the absolute figure. A watch that's reliably -8 every day is easy to live with, since you correct it once a week. One that swings from +10 to -15 is the real concern.
Case 264 — A maintenance log that remains useful after a sale · reader check exercise
Correction note for “A maintenance log that remains useful after a sale”: retain the wording beginning “Redact addresses and payment information; do not invent service…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. State what a new reader can and cannot infer from this exercise.
Method note for “QC checklist: prioritise observable faults over pixel hunting”: use “Start with function, legibility, assembly and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 7 — Case finishing: distinguish a reflection from a surface mark
Limit of the answer in “Case finishing: distinguish a reflection from a surface mark”: “Ask for photographs with the light moved and…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Case 36 — Movement identification: the limits of a rotor photograph
Summary draft for “Movement identification: the limits of a rotor photograph”: the answer addresses “Describe visible bridge shapes and markings separately…”; the related point is “Ask a qualified watchmaker to inspect it if identification matters for…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Clarification for “Shipping timeline: separate dispatch, handover and scan events”: the point beginning “Distinguish label creation from physical acceptance and retain dated…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 28 — QC checklist: prioritise observable faults over pixel hunting
Correction note for “QC checklist: prioritise observable faults over pixel hunting”: retain the wording beginning “Start with function, legibility, assembly and…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Ask a qualified watchmaker about a suitable test for that individual case and record the test date and method. A photograph or a caseback engraving is not proof of water resistance.
Case 3 — Strap dimensions: lug width, taper, thickness and spring bar diameter explained
Lug width is the essential one: the inside distance between the lugs where the strap fits. Measure with a ruler marked in millimetres, ideally reading it under magnification. Most watches use even numbers (18, 20, 22mm), but odd widths exist. If you measure 19 or 21, measure again and check the manufacturer spec before ordering.
Case 16 — Beginner glossary Q&A: complication, caliber, jewel count, power reserve
Caliber is the movement's model designation, like a part number. Two watches from different brands can share the same caliber family with different finishing or regulation. On a spec sheet it tells you what's inside and roughly what service parts are available. It doesn't tell you how well that particular example was adjusted.
Case 38 — Model comparison: dive bezel action and alignment, how to compare fairly · source wording exercise
Correction note for “Model comparison: dive bezel action and alignment, how to compare fairly”: retain the wording beginning “Crisp vs mushy is mostly about…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Retain the source wording beside any paraphrase.
Case 28 — Bracelet fit: half-links, micro-adjust holes and the 'between sizes' problem
First, a clarifying question: how many links are on each side of the clasp right now? Fit often improves by moving one link from the 6 o'clock side to the 12 o'clock side, or the reverse. That doesn't change length, but it shifts where the clasp sits under the wrist, and a centred clasp feels less tight.
Case 38 — Packing photographs: document condition without exposing an address · source wording exercise
Summary draft for “Packing photographs: document condition without exposing an address”: the answer addresses “Remove names, addresses, barcodes and tracking tokens from public…”; the related point is “Photograph the item and protective packing…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: source wording. Retain the source wording beside any paraphrase.
Case 20 — Comparison thread: 38mm vs 40mm versions of the same field watch, with a dated correction log
I'm putting together a side-by-side of the 38mm and 40mm versions of a common three-hand field watch design. The aim is a reference post we can fix over time instead of repeating the same arguments. Corrections go in a dated log at the bottom. What should the table include besides case diameter, and which specs are usually misreported?
Exercise RWF-10026/20: address this question within its stated limits.
If the manufacturer provides a suitable procedure, a running-time log can support a service enquiry. State the winding method and stop time. A shortened run does not identify the cause by itself.