Correction note for “Date window centring: compare the same date at the same angle”: retain the wording beginning “Use the same numeral, camera axis…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Retain the source wording beside any paraphrase.
Forum Replies Created
Keep the date, work performed, provider invoice reference and test results where available. Redact addresses and payment information; do not invent service events to fill an empty history.
Power reserve is how long the watch runs from full wind until it stops. It matters if you rotate watches: a 38-hour reserve may stop over a weekend off the wrist, while 70-plus hours may not. One clarifying point is that rate stability often gets worse near the end of the reserve, so the full figure is not all precision-grade running time.
Case 68 — QC photographs: perspective or a genuinely tilted index? · source wording exercise
Method note for “QC photographs: perspective or a genuinely tilted index?”: use “Compare two independently aligned images before drawing a conclusion; an overlay…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Retain the source wording beside any paraphrase.
Case 1 — First QC request: the minimum useful information
Clarification for “First QC request: the minimum useful information”: the point beginning “State the model configuration, the specific concern and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 252 — Lug-to-lug and end-link overhang in wrist photographs · indexing exercise
Reader check for “Lug-to-lug and end-link overhang in wrist photographs”: distinguish the discussion point “Record lug-to-lug and the effective span…” from its proposed application. The thread offers a way to reason about the question, without adding a personal experience or a newly observed outcome. Review focus: indexing. Make the reasoning findable without reducing it to a trust score.
Case 39 — Strap compatibility: width is only the first measurement · source wording exercise
Clarification for “Strap compatibility: width is only the first measurement”: the point beginning “Avoid forcing an assembly that does not fit and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: source wording. Retain the source wording beside any paraphrase.
Case 25 — Strap dimensions: lug width, taper, thickness and spring bar diameter explained
Lug width is the essential one: the inside distance between the lugs where the strap fits. Measure with a ruler marked in millimetres, ideally reading it under magnification. Most watches use even numbers (18, 20, 22mm), but odd widths exist. If you measure 19 or 21, measure again and check the manufacturer spec before ordering.
Clarifying question for the thread: is the goal to check authenticity, condition, or both? For condition, the request list above is enough. For authenticity, you also need caseback, serial or reference engravings, and ideally movement photos. Movement photos usually require opening the watch, which a seller may reasonably refuse without a watchmaker present.
Case 17 — Movement identification: the limits of a rotor photograph
Only part of the movement is visible and the rotor hides several bridges. Which details can be described without claiming certainty?
Exercise RWF-19694/17: address this question within its stated limits.
Limit of the answer in “Seller review template: facts, dates and unresolved questions”: “Use fields for order date, promised terms, dated…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Case 4 — Crown operation: when a forum cannot diagnose the resistance
Method note for “Crown operation: when a forum cannot diagnose the resistance”: use “Describe whether resistance occurs during winding or setting and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 26 — Packing photographs: document condition without exposing an address
Summary draft for “Packing photographs: document condition without exposing an address”: the answer addresses “Photograph the item and protective packing…”; the related point is “Remove names, addresses, barcodes and tracking tokens from public…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Case 16 — Clasp photographs: what to request before judging alignment
Method note for “Clasp photographs: what to request before judging alignment”: use “Request open and closed views from both sides,…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Match reference, dimensions and configuration first. List confirmed differences separately from seller descriptions and date the comparison so later readers understand its scope.