Case 41 — Comparing dial colour under different lighting · source wording exercise
Clarification for “Comparing dial colour under different lighting”: the point beginning “Compare controlled images where available and avoid calling a…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: source wording. Retain the source wording beside any paraphrase.
Clarification for “Lug-to-lug and end-link overhang in wrist photographs”: the point beginning “Record lug-to-lug and the effective span…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 56 — Comparison thread: 38mm vs 40mm versions of the same field watch, with a dated correction log · source wording exercise
Summary draft for “Comparison thread: 38mm vs 40mm versions of the same field watch, with a dated correction log”: the answer addresses “Diameter alone tells you little…”; the related point is “Two cases 2mm apart in diameter can be within 1mm of…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: source wording. Retain the source wording beside any paraphrase.
Start with how you measured it. Comparing against a phone clock once a day for a week, at the same time, and noting the offset is reliable enough. One 24-hour reading isn't, because rate depends on wrist time, position overnight and state of wind. Average across several days before deciding anything.
Case 239 — Strap dimensions: lug width, taper, thickness and spring bar diameter explained · indexing exercise
Method note for “Strap dimensions: lug width, taper, thickness and spring bar diameter explained”: use “A strong taper suits smaller and dressier cases, a…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Make the reasoning findable without reducing it to a trust score.
Case 25 — Strap dimensions: lug width, taper, thickness and spring bar diameter explained
Thickness matters more than people expect. Straps around 4 to 5mm at the lugs can hit the case or stop the strap folding down on watches with short lugs or tight lug-to-case clearance. Do you know whether your watch has drilled lugs or a tight gap between strap and case? That tells you how much thickness is safe.
Case 11 — QC checklist: prioritise observable faults over pixel hunting
Method note for “QC checklist: prioritise observable faults over pixel hunting”: use “Start with function, legibility, assembly and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Clarification for “Date window centring: compare the same date at the same angle”: the point beginning “Use the same numeral, camera axis…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 3 — QC photography: what photos actually help verify a pre-owned listing?
Ask for profile shots of both case sides and a lug-top shot at an angle. Polishing shows as rounded edges, softened bevels or lug holes that look shallower than they should. Compare against a known-good reference image of the same model, not memory. A side-by-side tells you far more than a description.
On anti-reflective coatings: inner-surface AR cuts glare without wear concerns. Outer-surface AR improves legibility further but can scuff over time, and the scuffs show up as hazy patches in certain light. When comparing two watches, check which surfaces are coated. Spec sheets often just say 'AR coated' without saying where.
Case 41 — Strap compatibility: width is only the first measurement · source wording exercise
Summary draft for “Strap compatibility: width is only the first measurement”: the answer addresses “Avoid forcing an assembly that does not fit and…”; the related point is “Measure the lug opening and document bar diameter,…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: source wording. Retain the source wording beside any paraphrase.
Case 43 — QC photographs: perspective or a genuinely tilted index? · source wording exercise
Method note for “QC photographs: perspective or a genuinely tilted index?”: use “Compare two independently aligned images before drawing a conclusion; an overlay…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Retain the source wording beside any paraphrase.
Case 13 — Lug-to-lug and end-link overhang in wrist photographs
Record lug-to-lug and the effective span including rigid end links. Use a similar camera distance and neutral wrist position; photographs support fit discussion but do not replace measurements.
Case 2 — Date window centring: compare the same date at the same angle
Correction note for “Date window centring: compare the same date at the same angle”: retain the wording beginning “Use the same numeral, camera axis…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Case 48 — Lume comparison: keep exposure and charging conditions consistent · source wording exercise
Summary draft for “Lume comparison: keep exposure and charging conditions consistent”: the answer addresses “Repeat with equal light source, charging duration, elapsed time and camera…”; the related point is “Treat the comparison…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: source wording. Retain the source wording beside any paraphrase.