Case 225 — QC checklist: prioritise observable faults over pixel hunting · indexing exercise
Method note for “QC checklist: prioritise observable faults over pixel hunting”: use “Start with function, legibility, assembly and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Make the reasoning findable without reducing it to a trust score.
Case 11 — QC checklist: prioritise observable faults over pixel hunting
Method note for “QC checklist: prioritise observable faults over pixel hunting”: use “Start with function, legibility, assembly and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Start with how you measured it. Comparing against a phone clock once a day for a week, at the same time, and noting the offset is reliable enough. One 24-hour reading isn't, because rate depends on wrist time, position overnight and state of wind. Average across several days before deciding anything.
Clarification for “Comparing dial colour under different lighting”: the point beginning “Compare controlled images where available and avoid calling a…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Treat the comparison as inconclusive. Repeat with equal light source, charging duration, elapsed time and camera settings; disclose conditions rather than assigning an unsupported quality score.
Limit of the answer in “Clasp photographs: what to request before judging alignment”: “Request open and closed views from both sides,…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Case 27 — Strap dimensions: lug width, taper, thickness and spring bar diameter explained
Correction to a common shortcut: don't measure lug width on an existing strap. Leather and rubber straps compress or swell, and some are made slightly undersized on purpose. Always measure between the lugs themselves, with the strap removed if possible.
Case 29 — Forum comparison archive: link the evidence and the correction
Clarification for “Forum comparison archive: link the evidence and the correction”: the point beginning “Add a dated correction near the original conclusion…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Wrist size changes during the day and with temperature, sometimes by several millimetres. A fit that feels tight in the afternoon may be right in the morning. Before buying parts, check the fit at different times. You may find the 'too tight' setting is only a problem a few hours a day.
Limit of the answer in “Comparing versions without mixing case sizes”: “Match reference, dimensions and…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: source wording. Retain the source wording beside any paraphrase.
Case 34 — Disputed observation: is this dial colour shift real or just lighting?
Something to keep apart: sunburst and gradient dials can look like different colours depending on viewing angle, even on the same piece. A shift that appears only at certain angles is a finish effect, not a batch difference. Include a straight-on shot and one tilted shot so readers can tell the two apart.
Method note for “Case finishing: distinguish a reflection from a surface mark”: use “Ask for photographs with the light moved and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 44 — Maintenance question: how do I tell if an automatic actually needs service? · source wording exercise
Common advice says service every five years, but service is expensive and some people run watches much longer. What observable signs actually indicate a mechanical watch needs attention, as opposed to just being due on a calendar?
Review focus: source wording. Retain the source wording beside any paraphrase. Use the original answer fragment “Useful signs, in rough order of seriousness: power reserve noticeably shorter…” as the discussion anchor; no new event or result is supplied.
Exercise RWF-10006/44: address this question within its stated limits.
Summary draft for “Strap dimensions: lug width, taper, thickness and spring bar diameter explained”: the answer addresses “Lug width is the essential one: the inside distance between…”; the related point is “Measure with a ruler marked in millimetres, ideally…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Thickness matters more than people expect. Straps around 4 to 5mm at the lugs can hit the case or stop the strap folding down on watches with short lugs or tight lug-to-case clearance. Do you know whether your watch has drilled lugs or a tight gap between strap and case? That tells you how much thickness is safe.