Case 31 — Bracelet fit: measuring the usable clasp adjustment
A nominal case diameter says little about a bracelet that cannot be shortened enough. How should a sizing question be documented?
Exercise RWF-29865/31: address this question within its stated limits.
Case 33 — Model comparison: dive bezel action and alignment, how to compare fairly
People keep comparing the bezels on two similar dive-style watches. One is called crisp, the other mushy, and alignment complaints come up for both. What would a fair comparison look like, and what is actually a defect versus a preference?
Exercise RWF-29065/33: address this question within its stated limits.
Case 39 — Lug-to-lug and end-link overhang in wrist photographs · source wording exercise
Summary draft for “Lug-to-lug and end-link overhang in wrist photographs”: the answer addresses “Use a similar camera distance and neutral wrist position; photographs support…”; the related point is “Record lug-to-lug and the effective span…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: source wording. Retain the source wording beside any paraphrase.
Case 30 — Crystal types: sapphire, mineral and acrylic trade-offs for daily wear
On anti-reflective coatings: inner-surface AR cuts glare without wear concerns. Outer-surface AR improves legibility further but can scuff over time, and the scuffs show up as hazy patches in certain light. When comparing two watches, check which surfaces are coated. Spec sheets often just say 'AR coated' without saying where.
Case 221 — Comparing dial colour under different lighting · indexing exercise
Clarification for “Comparing dial colour under different lighting”: the point beginning “State the lighting and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: indexing. Make the reasoning findable without reducing it to a trust score.
Case 7 — Comparing dial colour under different lighting
Clarification for “Comparing dial colour under different lighting”: the point beginning “State the lighting and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 35 — Crown operation: when a forum cannot diagnose the resistance
A description of stiffness does not establish the cause. What information is safe and useful to collect before an inspection?
Exercise RWF-23428/35: address this question within its stated limits.
A sudden rate change has several possible causes. Ask a watchmaker to test suspected magnetism rather than diagnosing it from a compass or attempting an adjustment based on forum replies.
Method note for “Movement identification: the limits of a rotor photograph”: use “Describe visible bridge shapes and markings separately…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Compare the observed rate with the exact caliber and cased-watch specification, if available. An example such as -8 seconds per day cannot be declared acceptable solely from its price category.
Case 43 — Clasp photographs: what to request before judging alignment · source wording exercise
Clarification for “Clasp photographs: what to request before judging alignment”: the point beginning “Separate cosmetic alignment from whether the clasp engages reliably;…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: source wording. Retain the source wording beside any paraphrase.
Case 23 — Timegrapher reading context: what do rate, amplitude and beat error actually tell me?
The lift angle must match the movement specification for the amplitude reading to be meaningful. If it is unknown, label amplitude as provisional instead of accepting the instrument default.
Case 25 — Magnetism and rate: record evidence before naming a cause
Record the change and the circumstances without treating the suspected cause as established. A competent watchmaker can test and diagnose it; random adjustment is not a substitute for assessment.
Treat the comparison as inconclusive. Repeat with equal light source, charging duration, elapsed time and camera settings; disclose conditions rather than assigning an unsupported quality score.
Case 30 — QC photography: what photos actually help verify a pre-owned listing?
A dated note in the frame can support a claim that photographs are recent, but it is not conclusive proof of ownership, authenticity or an honest transaction. Treat it as one limited check alongside independent verification.