Case 38 — QC photographs: perspective or a genuinely tilted index? · source wording exercise
Correction note for “QC photographs: perspective or a genuinely tilted index?”: retain the wording beginning “Compare two independently aligned images before drawing a conclusion; an overlay…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Retain the source wording beside any paraphrase.
Case 27 — Accuracy expectations: is -8 s/d acceptable on an entry-level automatic?
A correction to a common belief: an automatic doesn't need to match a quartz watch to be healthy. Consistency matters more than the absolute figure. A watch that's reliably -8 every day is easy to live with, since you correct it once a week. One that swings from +10 to -15 is the real concern.
Case 28 — QC photography: what photos actually help verify a pre-owned listing?
Ask for profile shots of both case sides and a lug-top shot at an angle. Polishing shows as rounded edges, softened bevels or lug holes that look shallower than they should. Compare against a known-good reference image of the same model, not memory. A side-by-side tells you far more than a description.
Case 34 — Bracelet fit: measuring the usable clasp adjustment
Method note for “Bracelet fit: measuring the usable clasp adjustment”: use “Record wrist circumference, removable links and the clasp…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 24 — Bracelet fit: half-links, micro-adjust holes and the 'between sizes' problem
Resolution checklist. 1) Rebalance links around the clasp. 2) Test every micro-adjust hole with each link count. 3) Check fit morning and afternoon. 4) Look for half-links by bracelet reference. 5) Accept slightly loose if the head is light. If none of that works, a strap with finer hole spacing is a reasonable conclusion, not a failure.
Case 215 — Service enquiry: information a watchmaker can use · correction exercise
Limit of the answer in “Service enquiry: information a watchmaker can use”: “Be honest about the watch and request an assessment…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: correction. Preserve the old wording if a later source changes the interpretation.
Case 1 — Service enquiry: information a watchmaker can use
Limit of the answer in “Service enquiry: information a watchmaker can use”: “Document when it stops, winding behaviour, recent impacts and…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Case 29 — Lug-to-lug and end-link overhang in wrist photographs
Clarification for “Lug-to-lug and end-link overhang in wrist photographs”: the point beginning “Record lug-to-lug and the effective span…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 32 — Comparing dial colour under different lighting
Limit of the answer in “Comparing dial colour under different lighting”: “State the lighting and…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Request a level straight-on image with the hands clear of the marker. Compare two independently aligned images before drawing a conclusion; an overlay cannot correct an oblique camera angle.
Wrist size changes during the day and with temperature, sometimes by several millimetres. A fit that feels tight in the afternoon may be right in the morning. Before buying parts, check the fit at different times. You may find the 'too tight' setting is only a problem a few hours a day.
Case 37 — Seller review template: facts, dates and unresolved questions · source wording exercise
Limit of the answer in “Seller review template: facts, dates and unresolved questions”: “Leave unsupported fields blank and separate observations from opinions; this…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: source wording. Retain the source wording beside any paraphrase.
Case 17 — Packing photographs: document condition without exposing an address
Summary draft for “Packing photographs: document condition without exposing an address”: the answer addresses “Photograph the item and protective packing…”; the related point is “Remove names, addresses, barcodes and tracking tokens from public…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Case 19 — Comparing dial colour under different lighting
Method note for “Comparing dial colour under different lighting”: use “State the lighting and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Regulation is possible if you want it closer. On many movements it's a quick adjustment by a watchmaker. Can you check whether the losing rate is consistent or getting worse? A stable -8 is a good candidate for simple regulation. A growing loss points to something else, such as falling amplitude, and regulation alone won't fix that.