Case 29 — Lume questions: why does my lume fade so quickly, and how should I compare it?
Lume photos are close to useless for comparison unless exposure is fixed. Phones raise exposure automatically in the dark, so a dim watch can look as bright as a strong one. For a fair photo comparison: same charge method, same delay after charging, manual exposure, and both watches in the same frame.
Case 19 — Comparison thread: 38mm vs 40mm versions of the same field watch, with a dated correction log
Add lug-to-lug, thickness and lug width as separate rows. Diameter alone tells you little about wearability. Two cases 2mm apart in diameter can be within 1mm of each other lug to lug, and that number decides whether the watch overhangs a small wrist. Also give the source for each figure: manufacturer sheet, caliper measurement, or catalogue listing.
Case 209 — QC photographs: perspective or a genuinely tilted index? · correction exercise
Correction note for “QC photographs: perspective or a genuinely tilted index?”: retain the wording beginning “Compare two independently aligned images before drawing a conclusion; an overlay…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Preserve the old wording if a later source changes the interpretation.
Resolution checklist. 1) Rebalance links around the clasp. 2) Test every micro-adjust hole with each link count. 3) Check fit morning and afternoon. 4) Look for half-links by bracelet reference. 5) Accept slightly loose if the head is light. If none of that works, a strap with finer hole spacing is a reasonable conclusion, not a failure.
Case 23 — Reading a timegrapher recording without losing the context
Method note for “Reading a timegrapher recording without losing the context”: use “Keep the complete recording and ask for the…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 26 — Service enquiry: information a watchmaker can use
Correction note for “Service enquiry: information a watchmaker can use”: retain the wording beginning “Document when it stops, winding behaviour, recent impacts and…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Case 45 — Date window centring: compare the same date at the same angle · source wording exercise
Clarification for “Date window centring: compare the same date at the same angle”: the point beginning “Keep the uncropped originals alongside the detail crops and distinguish…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: source wording. Retain the source wording beside any paraphrase.
No single lighting setup settles that question. Compare multiple controlled angles and describe the visible observation without asserting material specifications that have not been verified.
Case 31 — Movement identification: the limits of a rotor photograph
Limit of the answer in “Movement identification: the limits of a rotor photograph”: “Describe visible bridge shapes and markings separately…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Case 12 — Comparing versions without mixing case sizes
Two purported versions differ in case diameter and bracelet. How can the comparison avoid attributing every difference to a revision?
Exercise RWF-17297/12: address this question within its stated limits.
Case 13 — Service enquiry: information a watchmaker can use
Limit of the answer in “Service enquiry: information a watchmaker can use”: “Document when it stops, winding behaviour, recent impacts and…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Case 33 — First QC request: the minimum useful information
Limit of the answer in “First QC request: the minimum useful information”: “State the model configuration, the specific concern and…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Case 19 — QC checklist: prioritise observable faults over pixel hunting
A large crop makes tiny differences look dramatic. How can a checklist remain proportionate?
Exercise RWF-12503/19: address this question within its stated limits.
Method note for “Crystal reflections: why a dark patch is not a coating test”: use “No single lighting setup settles…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 28 — Comparing dial colour under different lighting
Clarification for “Comparing dial colour under different lighting”: the point beginning “State the lighting and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.