Case 19 — Magnetism and rate: record evidence before naming a cause
Clarification for “Magnetism and rate: record evidence before naming a cause”: the point beginning “Record the change and the circumstances without treating…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 23 — QC photography: what photos actually help verify a pre-owned listing?
Proposed reusable request list. 1) Straight dial, diffuse light, hands clear of markers. 2) Both case profiles. 3) Lug tops at an angle. 4) Caseback and engravings. 5) Clasp and bracelet end links. 6) Dated note in frame. Optional: timegrapher reading or movement photos. Add or change items with a reason, and I'll keep the list current.
Case 13 — Magnetism and rate: record evidence before naming a cause
Record the change and the circumstances without treating the suspected cause as established. A competent watchmaker can test and diagnose it; random adjustment is not a substitute for assessment.
Case 203 — Strap dimensions: lug width, taper, thickness and spring bar diameter explained · correction exercise
Correction note for “Strap dimensions: lug width, taper, thickness and spring bar diameter explained”: retain the wording beginning “Taper affects look and comfort…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Preserve the old wording if a later source changes the interpretation.
Clarification for “Packing photographs: document condition without exposing an address”: the point beginning “Photograph the item and protective packing…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 17 — Disputed observation: is this dial colour shift real or just lighting?
Clarifying question: does anyone in the thread have access to both versions at once? Without simultaneous comparison, every claim either way is weak evidence. If not, the next best option is photos with a grey card in frame and white balance locked or set manually, which at least makes separate photos roughly comparable.
Case 20 — QC photographs: perspective or a genuinely tilted index?
Limit of the answer in “QC photographs: perspective or a genuinely tilted index?”: “Request a level straight-on image with the hands…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Case 39 — Lume questions: why does my lume fade so quickly, and how should I compare it? · source wording exercise
My watch's lume is bright for a few minutes and then barely visible. Is that normal? People post lume shots of different watches, but they all seem to use different charging and exposure, so I can't tell what's actually better.
Review focus: source wording. Retain the source wording beside any paraphrase. Use the original answer fragment “Afterglow fades fastest in the first minutes and then settles to…” as the discussion anchor; no new event or result is supplied.
Exercise RWF-20816/39: address this question within its stated limits.
Case 25 — Crystal types: sapphire, mineral and acrylic trade-offs for daily wear
On anti-reflective coatings: inner-surface AR cuts glare without wear concerns. Outer-surface AR improves legibility further but can scuff over time, and the scuffs show up as hazy patches in certain light. When comparing two watches, check which surfaces are coated. Spec sheets often just say 'AR coated' without saying where.
Case 5 — Strap compatibility: width is only the first measurement
Summary draft for “Strap compatibility: width is only the first measurement”: the answer addresses “Measure the lug opening and document bar diameter,…”; the related point is “Avoid forcing an assembly that does not fit and…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Case 7 — QC photographs: perspective or a genuinely tilted index?
Method note for “QC photographs: perspective or a genuinely tilted index?”: use “Request a level straight-on image with the hands…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Lume photos are close to useless for comparison unless exposure is fixed. Phones raise exposure automatically in the dark, so a dim watch can look as bright as a strong one. For a fair photo comparison: same charge method, same delay after charging, manual exposure, and both watches in the same frame.
Case 27 — Clasp photographs: what to request before judging alignment
Method note for “Clasp photographs: what to request before judging alignment”: use “Request open and closed views from both sides,…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 12 — Lume comparison: keep exposure and charging conditions consistent
Summary draft for “Lume comparison: keep exposure and charging conditions consistent”: the answer addresses “Treat the comparison…”; the related point is “Repeat with equal light source, charging duration, elapsed time and camera…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Case 22 — Service enquiry: information a watchmaker can use
Document when it stops, winding behaviour, recent impacts and the positions in which it happens. Be honest about the watch and request an assessment before approving work or ordering parts.