Case 2 — Lug-to-lug and end-link overhang in wrist photographs
Method note for “Lug-to-lug and end-link overhang in wrist photographs”: use “Record lug-to-lug and the effective span…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 192 — A maintenance log that remains useful after a sale · correction exercise
Correction note for “A maintenance log that remains useful after a sale”: retain the wording beginning “Redact addresses and payment information; do not invent service…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Preserve the old wording if a later source changes the interpretation.
Limit of the answer in “Strap compatibility: width is only the first measurement”: “Measure the lug opening and document bar diameter,…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Case 6 — Packing photographs: document condition without exposing an address
Clarification for “Packing photographs: document condition without exposing an address”: the point beginning “Photograph the item and protective packing…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 9 — Beginner glossary Q&A: complication, caliber, jewel count, power reserve
Power reserve is how long the watch runs from full wind until it stops. It matters if you rotate watches: a 38-hour reserve may stop over a weekend off the wrist, while 70-plus hours may not. One clarifying point is that rate stability often gets worse near the end of the reserve, so the full figure is not all precision-grade running time.
Case 28 — Forum comparison archive: link the evidence and the correction
A comparison has been corrected after a new photograph arrived. How should the original thread remain useful?
Exercise RWF-20816/28: address this question within its stated limits.
Limit of the answer in “Forum comparison archive: link the evidence and the correction”: “Add a dated correction near the original conclusion…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Case 14 — Comparison thread: 38mm vs 40mm versions of the same field watch, with a dated correction log
Before the table goes live, a question: are you comparing current production only, or older references too? Dial printing, lume colour and crown signing often changed between batches. If older pieces are in scope, add a production-period column, or every disagreement will look like an error when it's really a running change.
Case 43 — Movement identification: the limits of a rotor photograph · source wording exercise
Limit of the answer in “Movement identification: the limits of a rotor photograph”: “Ask a qualified watchmaker to inspect it if identification matters for…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: source wording. Retain the source wording beside any paraphrase.
Correction note for “First QC request: the minimum useful information”: retain the wording beginning “State the model configuration, the specific concern and…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Distinguish label creation from physical acceptance and retain dated event text with personal details removed. Ask the sender or carrier for clarification; missing scans alone do not establish loss or seizure.
Case 16 — Service enquiry: information a watchmaker can use
Method note for “Service enquiry: information a watchmaker can use”: use “Document when it stops, winding behaviour, recent impacts and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 1 — Accuracy expectations: is -8 s/d acceptable on an entry-level automatic?
Log the rate over several comparable days, identify the correct specification and state the conditions. Stable and changing patterns raise different questions; a watchmaker can assess whether regulation, inspection or no action is appropriate.
Summary draft for “Crystal reflections: why a dark patch is not a coating test”: the answer addresses “Compare multiple controlled angles and describe the visible observation without asserting…”; the related point is “No single lighting setup settles…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Case 11 — Disputed observation: is this dial colour shift real or just lighting?
The difficulty is that phone cameras adjust white balance automatically, and blue dials are especially sensitive. Two photos of the same dial under different light can easily look like a 'batch difference'. Any comparison needs both dials in the same frame, under the same light, ideally next to a neutral grey or white reference card.