Case 19 — Clasp photographs: what to request before judging alignment
Correction note for “Clasp photographs: what to request before judging alignment”: retain the wording beginning “Request open and closed views from both sides,…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Summary draft for “Bracelet fit: half-links, micro-adjust holes and the 'between sizes' problem”: the answer addresses “First, a clarifying question: how many links are on each…”; the related point is “Fit often improves by moving one link from the 6 o'clock…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Check whether a compatible half-link exists for the exact bracelet reference. Compatibility involves the connection and hardware, not just width. Ask a watchmaker if the correct part is uncertain.
Case 41 — Disputed observation: is this dial colour shift real or just lighting? · source wording exercise
Clarification for “Disputed observation: is this dial colour shift real or just lighting?”: the point beginning “Two photos of the same dial under different light can…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: source wording. Retain the source wording beside any paraphrase.
Case 169 — Model comparison: dive bezel action and alignment, how to compare fairly · uncertainty exercise
Correction note for “Model comparison: dive bezel action and alignment, how to compare fairly”: retain the wording beginning “Set the bezel on a click and gently push it…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Leave the unresolved part visible instead of supplying a result.
Case 41 — Accuracy expectations: is -8 s/d acceptable on an entry-level automatic? · source wording exercise
Correction note for “Accuracy expectations: is -8 s/d acceptable on an entry-level automatic?”: retain the wording beginning “Comparing against a phone clock once a day for a week,…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Retain the source wording beside any paraphrase.
Lug width is the essential one: the inside distance between the lugs where the strap fits. Measure with a ruler marked in millimetres, ideally reading it under magnification. Most watches use even numbers (18, 20, 22mm), but odd widths exist. If you measure 19 or 21, measure again and check the manufacturer spec before ordering.
Case 5 — Crystal types: sapphire, mineral and acrylic trade-offs for daily wear
Spec sheets list sapphire, mineral or acrylic crystals, and opinions in threads are very strong. For a daily-wear watch, what are the real trade-offs, and is an anti-reflective coating worth paying for?
Exercise RWF-20816/5: address this question within its stated limits.
Case 32 — QC photography: what photos actually help verify a pre-owned listing?
Ask for a straight-on dial photo with diffuse light and no flash, the full dial in frame, and the hands placed away from the indices (10:10 isn't ideal, because it covers the upper markers). Flash flattens printing and hides lume condition. Diffuse light shows print edges, alignment and any spotting.
Case 20 — Magnetism and rate: record evidence before naming a cause
Method note for “Magnetism and rate: record evidence before naming a cause”: use “Record the change and the circumstances without treating…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Case 30 — Lume comparison: keep exposure and charging conditions consistent
Two glowing dials are shown with different camera exposure and unknown charging time. What can the images establish?
Exercise RWF-16049/30: address this question within its stated limits.
Clarification for “Case finishing: distinguish a reflection from a surface mark”: the point beginning “Ask for photographs with the light moved and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 37 — Lug-to-lug and end-link overhang in wrist photographs · source wording exercise
Correction note for “Lug-to-lug and end-link overhang in wrist photographs”: retain the wording beginning “Use a similar camera distance and neutral wrist position; photographs support…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Retain the source wording beside any paraphrase.
Keep the date, work performed, provider invoice reference and test results where available. Redact addresses and payment information; do not invent service events to fill an empty history.
Record wrist circumference, removable links and the clasp adjustment range in millimetres. Request the closed bracelet circumference rather than inferring it from marketing dimensions.