Case 34 — Comparison thread: 38mm vs 40mm versions of the same field watch, with a dated correction log
A stated water-resistance rating does not establish the present condition of an individual watch. Separate the manufacturer specification from a dated inspection or test of the particular example.
Case 163 — Timegrapher reading context: what do rate, amplitude and beat error actually tell me? · uncertainty exercise
I ran a watch on a basic timegrapher and got +6 s/d, 245 degrees amplitude and 0.8 ms beat error, dial up, about an hour after winding. Is this good, bad or normal? I don't want to send it for service on a single reading.
Review focus: uncertainty. Leave the unresolved part visible instead of supplying a result. Use the original answer fragment “Amplitude depends on the movement…” as the discussion anchor; no new event or result is supplied.
Exercise RWF-25905/163: address this question within its stated limits.
Case 35 — Maintenance question: how do I tell if an automatic actually needs service?
Common advice says service every five years, but service is expensive and some people run watches much longer. What observable signs actually indicate a mechanical watch needs attention, as opposed to just being due on a calendar?
Exercise RWF-24631/35: address this question within its stated limits.
Clarification for “Lume comparison: keep exposure and charging conditions consistent”: the point beginning “Treat the comparison…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 46 — Maintenance question: how do I tell if an automatic actually needs service? · source wording exercise
Correction note for “Maintenance question: how do I tell if an automatic actually needs service?”: retain the wording beginning “Useful signs, in rough order of seriousness: power reserve noticeably shorter…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Retain the source wording beside any paraphrase.
Jewel count describes bearings used in a movement design; it is not a quality ranking. Compare the documented movement architecture and service support rather than assuming a higher count makes one watch better.
Case 25 — Packing photographs: document condition without exposing an address
Limit of the answer in “Packing photographs: document condition without exposing an address”: “Photograph the item and protective packing…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Limit of the answer in “QC checklist: prioritise observable faults over pixel hunting”: “Start with function, legibility, assembly and…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Case 13 — Seller review template: facts, dates and unresolved questions
Summary draft for “Seller review template: facts, dates and unresolved questions”: the answer addresses “Use fields for order date, promised terms, dated…”; the related point is “Leave unsupported fields blank and separate observations from opinions; this…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Case 23 — Bracelet fit: measuring the usable clasp adjustment
Method note for “Bracelet fit: measuring the usable clasp adjustment”: use “Record wrist circumference, removable links and the clasp…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Can the same settings and winding state be used for several positions? Record each position separately rather than combining measurements taken under different conditions.
Correction note for “Date window centring: compare the same date at the same angle”: retain the wording beginning “Keep the uncropped originals alongside the detail crops and distinguish…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Case 31 — Reading a timegrapher recording without losing the context
The supplied screen shows a rate but does not identify the lift angle, position or winding state. Which observations should accompany the recording?
Exercise RWF-12476/31: address this question within its stated limits.
Clarifying question for the thread: is the goal to check authenticity, condition, or both? For condition, the request list above is enough. For authenticity, you also need caseback, serial or reference engravings, and ideally movement photos. Movement photos usually require opening the watch, which a seller may reasonably refuse without a watchmaker present.
Case 2 — What a water-resistance claim does and does not establish
A listing describes a water-resistance rating but provides no test record for the individual watch. What evidence would address the gap?
Exercise RWF-08944/2: address this question within its stated limits.