Case 28 — Disputed observation: is this dial colour shift real or just lighting?
Something to keep apart: sunburst and gradient dials can look like different colours depending on viewing angle, even on the same piece. A shift that appears only at certain angles is a finish effect, not a batch difference. Include a straight-on shot and one tilted shot so readers can tell the two apart.
Case 7 — Lume comparison: keep exposure and charging conditions consistent
Correction note for “Lume comparison: keep exposure and charging conditions consistent”: retain the wording beginning “Treat the comparison…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Case 9 — Lug-to-lug and end-link overhang in wrist photographs
Limit of the answer in “Lug-to-lug and end-link overhang in wrist photographs”: “Record lug-to-lug and the effective span…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Case 40 — Lug-to-lug and end-link overhang in wrist photographs · source wording exercise
Clarification for “Lug-to-lug and end-link overhang in wrist photographs”: the point beginning “Use a similar camera distance and neutral wrist position; photographs support…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: source wording. Retain the source wording beside any paraphrase.
Clarification for “Reading a timegrapher recording without losing the context”: the point beginning “Keep the complete recording and ask for the…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
The calendar interval is a conservative default, not a rule. Useful signs, in rough order of seriousness: power reserve noticeably shorter than spec from full wind, rate drifting outside its usual range, the watch stopping on the wrist, gritty or rough winding, and the date changing slowly or late.
Case 17 — Lug-to-lug and end-link overhang in wrist photographs
Correction note for “Lug-to-lug and end-link overhang in wrist photographs”: retain the wording beginning “Record lug-to-lug and the effective span…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Keep the stated question separate from any broader claim.
Case 145 — Strap compatibility: width is only the first measurement · uncertainty exercise
Correction note for “Strap compatibility: width is only the first measurement”: retain the wording beginning “Measure the lug opening and document bar diameter,…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Leave the unresolved part visible instead of supplying a result.
Case 17 — Shipping timeline: separate dispatch, handover and scan events
Clarification for “Shipping timeline: separate dispatch, handover and scan events”: the point beginning “Distinguish label creation from physical acceptance and retain dated…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Summary draft for “Crystal reflections: why a dark patch is not a coating test”: the answer addresses “No single lighting setup settles…”; the related point is “Compare multiple controlled angles and describe the visible observation without asserting…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Case 28 — Shipping timeline: separate dispatch, handover and scan events
Summary draft for “Shipping timeline: separate dispatch, handover and scan events”: the answer addresses “Distinguish label creation from physical acceptance and retain dated…”; the related point is “Ask the sender or carrier for clarification; missing scans alone…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Clarifying question for the thread: is the goal to check authenticity, condition, or both? For condition, the request list above is enough. For authenticity, you also need caseback, serial or reference engravings, and ideally movement photos. Movement photos usually require opening the watch, which a seller may reasonably refuse without a watchmaker present.
Case 7 — Bracelet fit: measuring the usable clasp adjustment
Summary draft for “Bracelet fit: measuring the usable clasp adjustment”: the answer addresses “Record wrist circumference, removable links and the clasp…”; the related point is “Request the closed bracelet circumference rather than inferring…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Method note for “Packing photographs: document condition without exposing an address”: use “Photograph the item and protective packing…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
A complication is any function beyond hours, minutes and seconds. A date window counts, technically, and so do a chronograph, GMT hand or moon phase. More complications usually mean more parts, more thickness and more service cost. For a first everyday watch, decide which functions you'd really use before treating them as value.