Case 7 — Lume comparison: keep exposure and charging conditions consistent
Two glowing dials are shown with different camera exposure and unknown charging time. What can the images establish?
Exercise RWF-30724/7: address this question within its stated limits.
Case 8 — Service enquiry: information a watchmaker can use
Clarification for “Service enquiry: information a watchmaker can use”: the point beginning “Document when it stops, winding behaviour, recent impacts and…” belongs to the question as written. It should not be read as a report that a new check, purchase or experiment has been completed. Review focus: scope. Keep the stated question separate from any broader claim.
Case 38 — Movement identification: the limits of a rotor photograph · source wording exercise
Correction note for “Movement identification: the limits of a rotor photograph”: retain the wording beginning “Ask a qualified watchmaker to inspect it if identification matters for…” in the record. If later material changes it, add the date, the changed wording and the source for that change; do not invent a completed correction here. Retain the source wording beside any paraphrase.
A bright initial glow followed by a steep drop is normal for photoluminescent pigments. Afterglow fades fastest in the first minutes and then settles to a dim, long-lasting level that dark-adapted eyes can still read. The real question is whether it's readable after an hour in darkness, not how it looks right after charging.
Case 14 — What a water-resistance claim does and does not establish
Ask a qualified watchmaker about a suitable test for that individual case and record the test date and method. A photograph or a caseback engraving is not proof of water resistance.
Case 141 — What a water-resistance claim does and does not establish · documentation exercise
Summary draft for “What a water-resistance claim does and does not establish”: the answer addresses “A photograph or a caseback engraving is not…”; the related point is “Ask a qualified watchmaker about a suitable test for that individual…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: documentation. Distinguish an original record from a proposed record format.
Case 13 — Service enquiry: information a watchmaker can use
Method note for “Service enquiry: information a watchmaker can use”: use “Document when it stops, winding behaviour, recent impacts and…” as a row heading in a proposed working record. Put the statement, its supporting source or measurement, and any unresolved detail in separate fields. This proposes a format; it supplies no additional evidence. Keep the stated question separate from any broader claim.
Match reference, dimensions and configuration first. List confirmed differences separately from seller descriptions and date the comparison so later readers understand its scope.
Case 25 — Lug-to-lug and end-link overhang in wrist photographs
A wide-angle wrist photo exaggerates the nearest edge of the case. How can two watches be compared fairly?
Exercise RWF-21920/25: address this question within its stated limits.
Reader check for “Packing photographs: document condition without exposing an address”: distinguish the discussion point “Photograph the item and protective packing…” from its proposed application. The thread offers a way to reason about the question, without adding a personal experience or a newly observed outcome. Review focus: scope. Keep the stated question separate from any broader claim.
Case 4 — Crystal types: sapphire, mineral and acrylic trade-offs for daily wear
Spec sheets list sapphire, mineral or acrylic crystals, and opinions in threads are very strong. For a daily-wear watch, what are the real trade-offs, and is an anti-reflective coating worth paying for?
Exercise RWF-19593/4: address this question within its stated limits.
Limit of the answer in “Clasp photographs: what to request before judging alignment”: “Separate cosmetic alignment from whether the clasp engages reliably;…” is an excerpt from the discussion, not an independent verification. A reader needs the relevant original material before treating an interpretation as established. Review focus: scope. Keep the stated question separate from any broader claim.
Summary draft for “Magnetism and rate: record evidence before naming a cause”: the answer addresses “A competent watchmaker can test and diagnose it; random adjustment…”; the related point is “Record the change and the circumstances without treating…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Case 1 — QC checklist: prioritise observable faults over pixel hunting
Summary draft for “QC checklist: prioritise observable faults over pixel hunting”: the answer addresses “Start with function, legibility, assembly and…”; the related point is “Explain what the full-size image shows, what the crop adds and…”. Keep both connected to the opening question, and mark any conclusion needing further records as unresolved. Review focus: scope. Keep the stated question separate from any broader claim.
Case 48 — Comparing dial colour under different lighting · source wording exercise
Reader check for “Comparing dial colour under different lighting”: distinguish the discussion point “Compare controlled images where available and avoid calling a…” from its proposed application. The thread offers a way to reason about the question, without adding a personal experience or a newly observed outcome. Review focus: source wording. Retain the source wording beside any paraphrase.